Western Digital Ultrastar DC HC555 Hard Drive 18 TB SATA III 3.5″ 7200 RPM

SKU: 0B48723

£1,271.80

In stock

In stock

  • Free Premium delivery on UK mainland orders

Order today, get it by Fri 20 Nov

  • DPD DPD tracked delivery
  • Klarna Buy now, pay later with Klarna at checkout
  • PayPal Pay in 3 instalments with PayPal at checkout

About this item

  • 18 TB capacity for high-density data storage
  • 7200 RPM spindle speed with 257 MiB/s sustained transfer
  • 512 MB buffer for server and workstation use
  • 3.5-inch form factor with Serial ATA III interface
  • Designed for continuous 24/7 operation
  • 2.5 million-hour MTBF rating and five-year warranty
Description

Western Digital Ultrastar DC HC555 – 18 TB for 24/7 storage

We recommend the Western Digital Ultrastar DC HC555 for servers and workstations needing high-capacity, 24/7 storage. Its 18 TB capacity helps accommodate large datasets on a single 3.5-inch hard drive.

Key specs at a glance

Metric Specification
Capacity 18 TB
Form factor 3.5-inch
Rotational speed 7,200 RPM
Interface SATA III, 6 Gbit/s
Buffer 512 MB
Sustained transfer rate 257 MiB/s

Built for continuous server workloads

This drive is designed for server and workstation use, with support for continuous 24/7 operation. Its 7,200 RPM speed and 257 MiB/s sustained transfer rate suit storage systems handling frequent access to large files.

Western Digital rates the drive at 2.5 million hours MTBF. This is a reliability rating for the model, not a guarantee of an individual drive’s operating life. The drive also supports up to 600,000 start/stop cycles.

High capacity with power-conscious design

Western Digital’s ePMR technology supports high-capacity storage while aiming to lower total cost of ownership. HelioSeal technology creates a stable internal environment for this helium-filled drive.

Typical power consumption is 6.4 W, falling to 5.3 W when idle. Triple-Stage Actuator technology supports precise actuator control, while rotation vibration sensors help counteract vibration in data centre environments.

Protection against vibration and shock

The drive uses multi-axis shock sensors to detect sudden impacts. Dynamic fly height technology then helps compensate, supporting performance and data protection. These measures are useful in systems where drives operate alongside other equipment.

Check your system before ordering

  • Confirm your chassis has a 3.5-inch drive bay.
  • Check that your system supports a SATA III hard drive.
  • Confirm your power setup supports the drive’s 5 V and 12 V operating voltages.
  • Check that your installation plan allows for a drive that is not hot-swappable.

Frequently Asked Questions

Q: Is this drive suitable for 24/7 operation?

A: Yes. It is designed for continuous operation in server and workstation environments.

Q: What interface does the drive use?

A: It uses a SATA III interface with an interface transfer rate of 6 Gbit/s.

Q: Can I hot-swap this drive?

A: No. This model is not hot-swappable.

Q: What warranty does it have?

A: It has a five-year warranty.

A strong fit for high-capacity storage

The Western Digital Ultrastar DC HC555 suits buyers building or expanding server and workstation storage. Its 18 TB capacity, continuous-operation design and five-year warranty make it a practical choice for demanding storage roles.

Specifications
Hard drive
Component forServer/workstation
HDD sustained transfer rate257 MiB/s
HDD interface transfer rate6 Gbit/s
HDD average transfer rate269 MB/s
Average latency4.16 ms
Mean time between failures (MTBF)2500000 h
Start/stop cycles600000
Hot-swapNo
HDD speed7200 RPM
HDD size3.5"
HDD capacity18 TB
Features
TypeHDD
Component forServer/workstation
HDD sustained transfer rate257 MiB/s
HDD interface transfer rate6 Gbit/s
HDD average transfer rate269 MB/s
InterfaceSerial ATA III
Average latency4.16 ms
Mean time between failures (MTBF)2500000 h
Start/stop cycles600000
Hot-swapNo
HDD speed7200 RPM
HDD size3.5"
HDD capacity18 TB
Storage drive buffer size512 MB
24/7 operationYes
Power
Power consumption (typical)6.4 W
Power consumption (idle)5.3 W
Operating voltage5 / 12 V
Operational conditions
Operating temperature5 - 60 °C
Storage temperature-40 - 70 °C
Operating vibration0.67 G
Operating shock50 G
Non-operating vibration1.04 G
Non-operating shock250 G
Technical details
Warranty period5 years
InterfaceSerial ATA III
Mean time between failures (MTBF)2500000 h
Hot-swapNo
Weight & dimensions
Width101.6 mm
Weight679 g
Height26.1 mm
Depth147 mm
Other features
InterfaceSerial ATA III
Warranty period5 years

Reviews

0 reviews
0
0
0
0
0

There are no reviews yet.

Write a review

Your email is never published.

You have to be logged in to be able to add photos to your review.