Zyxel GS1350-26HP Managed Gigabit PoE Switch, 24-Port, 375 W, 2 Combo SFP, Grey
£402.95
Out of stock
Out of stock
- Free Premium delivery on UK mainland orders
Order today, get it by Fri 20 Nov
-
DPD tracked delivery
-
Buy now, pay later with Klarna at checkout
-
Pay in 3 instalments with PayPal at checkout
About this item
- 375 W PoE budget across 24 PoE ports
- 24 Gigabit Ethernet ports and two combo SFP ports
- 52 Gbit/s switching capacity with 38.7 Mpps forwarding
- Managed Layer 2 switching with web-based management
- IEEE 802.3af/at PoE standards support
- Extended-range PoE supports deployments up to 250 metres
- Rack-mountable 441 mm switch with grey finish
Available alternatives
You may also like
TP-Link 24-Port Gigabit Network Switch
In stock
Zyxel GS1350-26HP – managed PoE for surveillance networks
The Zyxel GS1350-26HP suits businesses building or expanding an IP camera network. Its 24 PoE ports and 375 W power budget let you power multiple cameras through their network connections.
Key specifications at a glance
| Metric | Specification |
|---|---|
| Ethernet ports | 24 Gigabit RJ-45 |
| PoE budget | 375 W |
| Combo SFP ports | 2 |
| Switching layer | Managed Layer 2 |
| Switching capacity | 52 Gbit/s |
| Rack dimensions | 441 × 270 × 44 mm |
Keep surveillance devices powered and connected
With PoE on all 24 Ethernet ports, the switch delivers power and data over compatible network cabling. The 375 W total budget helps you plan how many powered devices to connect. Check the combined power needs of your cameras and other devices before installation.
Surveillance-focused software can detect failed IP cameras and powered devices, then attempt automatic recovery. Customisable recovery settings help you adapt this behaviour to different devices and scenarios. The switch can also keep power flowing during firmware or configuration maintenance, reducing the need for connected devices to restart.
Extend camera connections where needed
Extended-range mode supports deployments up to 250 metres over existing Cat 5e cable. This can help when a camera location sits beyond the usual 100-metre Ethernet distance. Use this mode when your layout calls for a longer cable run.
Two combo SFP ports support 1000BASE-X fibre connections. Layer 2 management adds web-based configuration, VLAN support for up to 256 VLANs, and IGMP snooping for multicast traffic. These controls help organise traffic across a surveillance network.
Check fit and network requirements
- Confirm your cameras and other powered devices use PoE and fit within the 375 W total budget.
- Check that your planned cable runs suit standard Ethernet distances or extended-range mode.
- Confirm your fibre connections use 1000BASE-X and suit the combo SFP ports.
- Check your rack has space for a 441 mm wide, 44 mm high switch.
Included in the box
- AC cable
- Rack mount kit
Frequently Asked Questions
Q: How many PoE devices can it connect?
A: It has 24 PoE ports. The total available PoE power is 375 W.
Q: Can it connect cameras beyond 100 metres?
A: Extended-range mode supports connections up to 250 metres over existing Cat 5e cable.
Q: Does it support fibre connections?
A: Yes. It has two combo SFP ports that support 1000BASE-X fibre.
Q: Can I manage it through a web browser?
A: Yes. It is a managed Layer 2 switch with web-based management.
A practical choice for managed CCTV networks
Choose the Zyxel GS1350-26HP if you need managed Gigabit connectivity and PoE for a larger camera installation. Its recovery functions, extended-range mode and fibre options support flexible surveillance layouts.
| Management features | |
|---|---|
| Multicast support | Yes |
| Switch type | Managed |
| Web-based management | Yes |
| System event log | Yes |
| MIB support | RFC 1066, RFC 1213, 1157, RFC 1493, RFC 1643, RFC 1757, RFC 2011, 2012, 2013, RFC 2233, RFC 2358, RFC 2674, RFC 2819, 2925, RFC 3621, RFC 4293, RFC 4292, RFC 4022, RFC 4113 |
| Switch layer | L2 |
| Configuring Location Settings (CLI) | Yes |
| Ports & interfaces | |
| Copper ethernet cabling technology | 10BASE-T, 100BASE-TX, 1000BASE-T |
| Basic switching RJ-45 Ethernet ports quantity | 24 |
| Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
| Combo SFP ports quantity | 2 |
| Network | |
| IGMP snooping | Yes |
| IGMP proxy | Yes |
| Copper ethernet cabling technology | 10BASE-T, 100BASE-TX, 1000BASE-T |
| Networking standards | IEEE 802.1D, IEEE 802.1ab, IEEE 802.1p, IEEE 802.1w, IEEE 802.3, IEEE 802.3ad, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z |
| VLAN support | Yes |
| Spanning tree protocol | Yes |
| Rate limiting | Yes |
| Port mirroring | Yes |
| Number of VLANs | 256 |
| Flow control support | Yes |
| Broadcast storm control | Yes |
| 10G support | No |
| Virtual LAN features | MAC address-based VLAN, Port-based VLAN |
| Virtual LAN features | |
| VLAN support | Yes |
| Number of VLANs | 256 |
| Virtual LAN features | MAC address-based VLAN, Port-based VLAN |
| Data transmission | |
| Number of VLANs | 256 |
| Packet buffer memory | 0.525 MB |
| MAC address table | 8000 entries |
| Switching capacity | 52 Gbit/s |
| Forwarding rate | 38.7 Mpps |
| Performance | |
| Packet buffer memory | 0.525 MB |
| Noise level | 40.1 dB |
| Mean time between failures (MTBF) | 888495 h |
| Firmware upgradeable | Yes |
| Harmonized System (HS) code | 85176990 |
| Technical details | |
| Product colour | Grey |
| Noise level | 40.1 dB |
| Mean time between failures (MTBF) | 888495 h |
| Firmware upgradeable | Yes |
| Rack mounting | Yes |
| Optical fibre | |
| Fibre ethernet cabling technology | 1000BASE-X |
| Security | |
| Loop protection | Yes |
| Security algorithms | SNMP, SNMPv3, SSH, SSL/TLS |
| IGMP snooping | Yes |
| Queue scheduling algorithms | SPQ, WFQ, Weighted Round Robin (WRR) |
| IGMP proxy | Yes |
| DHCP features | DHCP client, DHCP relay, DHCP snooping |
| Multicast features | |
| Multicast support | Yes |
| Certificates | |
| Electromagnetic compatibility | CE, FCC, C-Tick, A; BSMI CNS13438 |
| Certification | LVD EN62368-1, BSMI CNS14336-1, RoHS |
| Memory | |
| Packet buffer memory | 0.525 MB |
| Design | |
| Product colour | Grey |
| LED indicators | Yes |
| Electromagnetic compatibility | CE, FCC, C-Tick, A; BSMI CNS13438 |
| Certification | LVD EN62368-1, BSMI CNS14336-1, RoHS |
| Rack mounting | Yes |
| Indication | |
| LED indicators | Yes |
| Power | |
| Power consumption (max) | 448.9 W |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power over Ethernet (PoE) | |
| Total Power over Ethernet (PoE) budget | 375 W |
| Power over Ethernet (PoE) ports quantity | 24 |
| Power over Ethernet (PoE) | Yes |
| Operational conditions | |
| Storage temperature | -40 - 70 °C |
| Storage relative humidity | 5 - 95% |
| Operating temperature | -20 - 50 °C |
| Operating relative humidity | 5 - 95% |
| Heat dissipation | 1530.75 BTU/h |
| Weight & dimensions | |
| Width | 441 mm |
| Depth | 270 mm |
| Height | 44 mm |
| Weight | 3.58 kg |
| Packaging data | |
| Rack mount kit | Yes |
| Package width | 622 mm |
| Package depth | 355 mm |
| Package height | 110 mm |
| Package weight | 4.65 kg |
| Cables included | AC |
| Logistics data | |
| Harmonized System (HS) code | 85176990 |
| Packaging content | |
| Rack mount kit | Yes |
| Cables included | AC |

Reviews
Clear filtersThere are no reviews yet.