connektgear 0.5m RJ45 CAT5e UTP Stranded Network Cable – Grey

Connektgear 0.5m RJ45 CAT5e UTP Stranded Flush Moulded Network Cable – 24AWG – Grey | Short Patch Lead

This connektgear 0.5m RJ45 CAT5e UTP Stranded Flush Moulded Network Cable – 24AWG – Grey is a short patch lead for fast Ethernet setups. It is ideal for linking a PC to a wall port or a switch in a UK office. The key USP is the snagless moulded boot, which protects the clip during frequent moves. It uses 24AWG stranded conductors for flexibility in tight spaces. The cable is plug and play, with gold-plated contacts for a reliable connection.

Connektgear 0.5m RJ45 CAT5e UTP Stranded Flush Moulded Network Cable – 24AWG – Grey

Reliable Fast Ethernet performance

The cable supports 10/100Base-T(X) networking standards. It delivers 100 Mbit/s data transfer for typical office tasks. Because it runs at 100 MHz, it suits standard desktop and VoIP use. However, it is not listed here for Gigabit speeds. If you need 1000BASE-T, confirm device compatibility before purchase.

Snagless moulded boot design

The snagless cable boot helps prevent the RJ45 clip from catching on fabric or rack edges. Also, the flush moulded strain relief adds durability at the connector. This reduces damage during repeated plug and unplug cycles. In practice, it supports tidy cable management in short runs.

Flexible 24AWG stranded conductors

The 24AWG stranded copper conductors offer good flexibility for tight bends. So, this cable suits patch panels and desk setups with limited space. It is U/UTP (unshielded twisted pair), which is common for office environments. If you have high EMI, you may require shielded cabling.

Gold-plated contacts for connectivity

The connector contacts are plated with gold to aid corrosion resistance. This helps maintain consistent signal quality over time. The connectors are RJ-45 male to RJ-45 male. Note that connector shielding is not listed here; verify if you need shielded connectors.

Plug and play installation

The cable is plug and play, with no drivers or configuration required. It works with standard Ethernet ports on PCs, printers, and switches. The grey PVC jacket is practical for neat office cabling. If you need specific lengths or colours, confirm available options.

Package contents

• 1 x Connektgear 0.5m RJ45 CAT5e UTP Stranded Flush Moulded Network Cable – 24AWG – Grey

Things to check first

• Confirm your devices use standard RJ-45 Ethernet ports.
• Verify you need a 0.5 m length for your patch run.
• Check if your environment requires shielded connectors or U/UTP is acceptable.
• Confirm compliance needs (e.g., UKCA/CE) for your installation.

Frequently Asked Questions

Final thoughts

This lead suits UK office users needing a short, reliable patch for 100 Mbit/s connections. It offers a snagless boot and stranded conductors for daily flexibility. If you need Gigabit, PoE, or shielded performance, confirm those specs before purchase. Covered by the applicable manufacturer warranty.