connektgear 0.5m RJ45 CAT5e UTP Stranded Network Cable Purple
Out of stock
Out of stock
More Ways to Pay
-
Buy now, pay later with Klarna at checkout
-
Pay in 3 interest-free payments with PayPal at checkout
About This Item
- Purple Cat5e UTP stranded cable with RJ-45 connectors
- Gold-plated contacts for reliable connectivity
- 0.5 m length with snagless and molded boots
- Fast Ethernet support up to 100 Mbit/s at 100 MHz
- Complies with RoHS and REACH standards
- 24 AWG PVC jacket, male-to-male interface
Payment Methods:
You may also like
Connektgear RJ45 CAT5e UTP Network Cable | Purple Flush Moulded
This connektgear 0.5m RJ45 CAT5e UTP Stranded Flush Moulded Network Cable – 24AWG – Purple is a short patch lead for Fast Ethernet setups. It is designed for IT technicians and home users who need a tidy, reliable link between a PC and a network switch. Because it uses 24AWG stranded copper, it offers flexibility for frequent moves. Also, the snagless boot helps protect the latch during installation. In practice, this cable suits 100 Mbit/s tasks where a compact, colour-coded run is useful.
Connektgear 0.5m RJ45 CAT5e UTP Stranded Flush Moulded Network Cable – 24AWG – Purple
| Metric | Spec. |
|---|---|
| Cable length | 0.5 m |
| Cable standard | Cat5e |
| AWG wire size | 24 |
| Conductor type | Stranded |
| Data transfer rate | 100 Mbit/s |
| Jacket material | PVC |
Fast Ethernet performance for short runs
This cable supports 10/100Base-T(X) with a 100 MHz frequency. So it is suited to Fast Ethernet rather than Gigabit. For 100 Mbit/s tasks, such as desktop PCs, printers, or IP cameras, this provides a stable link. However, if you need higher throughput, confirm whether your equipment requires Cat5e or Cat6.
Gold-plated contacts for clean signal
The connectors feature gold plating to reduce corrosion. Because the contacts are gold, you get consistent conductivity over time. Also, the flush moulded design keeps the connector snag-free. So it is easier to patch into tight racks or cabinets.
Stranded copper for flexible patching
The stranded conductor type suits frequent movement. In practice, this makes the cable ideal for patch panels and desk drops. Because it is not solid core, it is not intended for long horizontal runs. So please verify your installation type before purchase.
U/UTP (UTP) construction for basic noise control
This cable uses unshielded twisted pair (U/UTP). So it is suitable for typical office or home environments with low EMI. However, if you plan to run cables near power lines, confirm the environment. Also, check your local standards for structured cabling.
Snagless, moulded boot for durability
The snagless boot protects the RJ45 latch from catching on cable ties. Because the boot is moulded, it offers strain relief at the connector. So the cable is less likely to fail at the termination point. Also, the purple colour helps with quick identification.
What is in the box
- 1 x Connektgear 0.5m RJ45 CAT5e UTP Stranded Flush Moulded Network Cable – 24AWG – Purple
Check before you buy
- Confirm your devices support 10/100BASE-T(X) Ethernet.
- Verify the required cable length for your rack or desk layout.
- Check if your environment needs shielded cable (this is U/UTP).
- Ensure the purple colour meets your cable management standards.
Questions and answers
Is this cable compatible with Gigabit Ethernet?
Are the connectors shielded?
Does the cable come with a warranty?
What is the conductor type?
Is the cable RoHS compliant?
Worth knowing before you buy
This cable is best for UK users who need a short, colour-coded patch lead for 100 Mbit/s tasks. It suits IT technicians, home office setups, and light patch panel work. Because it is compact and snagless, it is easy to install in tight spaces. Covered by the applicable manufacturer warranty.
| Certification | REACH |
|---|---|
| Product colour | Purple |
| Plug and Play | Yes |
| Cable standard | Cat5e |
| Cable shielding | U/UTP (UTP) |
| Connector 1 | RJ-45 |
| Connector 2 | RJ-45 |
| Connector contacts plating | Gold |
| Cabling technology | 10/100Base-T(X) |
| Data transfer rate | 100 Mbit/s |
| Networking standards | IEEE 802.3, IEEE 802.3u |
| Jacket material | Polyvinyl chloride (PVC) |
| Conductor type | Stranded |
| Cable length | 0.5 m |
| Compliance certificates | RoHS |
| Snagless cable boot | Yes |
| Connector shielding | No |
| Molded cable boot | Yes |
| Frequency | 100 MHz |
| AWG wire size | 24 |
| Connector 2 gender | Male |
| Connector 1 gender | Male |
| Weight | 30 g |
| Package width | 160 mm |
| Package height | 220 mm |
| Package type | Bag |
| Package weight | 3.5 g |
| Distributor SKUs | CK79523, STD10072930 |

Reviews
Clear filtersThere are no reviews yet.