StarTech.com 1m CAT6a LSZH Aqua S/FTP Cable – 10GbE 500MHz PoE++ Snagless RJ-45

StarTech.com 1m CAT6a Ethernet Cable | Aqua LSZH 10GbE

The StarTech.com 1m CAT6a Ethernet Cable – Aqua – Low Smoke Zero Halogen (LSZH) – 10GbE 500MHz 100W PoE++ Snagless RJ-45 w/Strain Reliefs S/FTP Network Patch Cord suits UK installers needing robust 10GBase-T links. It supports 100W PoE++ and uses S/FTP shielding for EMI resistance. The aqua LSZH jacket offers low-smoke safety for indoor runs.

Slim Specs Table

10GbE Performance with S/FTP Shielding

This cable uses S/FTP shielding to limit EMI and RFI. It supports 10GBase-T for high-speed server or NAS links. The 500 MHz rating helps maintain signal integrity over short runs. For longer UK cable runs, verify your switch and patch panel meet the same standard.

100W PoE++ for Power-Hungry Devices

It complies with IEEE 802.3bt-2018 and supports 100W PoE++. This suits Type 4 devices like advanced APs or PTZ cameras. Confirm your injector or switch provides PoE++ power. In practice, one cable delivers both data and power cleanly.

LSZH Safety for Indoor Installations

The LSZH jacket reduces toxic fumes and smoke during a fire. This improves visibility and evacuation safety in offices and schools. It is more eco-friendly than PVC. Verify local building regulations for LSZH usage in your facility.

Snagless RJ-45 with Strain Relief

The snagless boots protect the latch during routing. Integrated strain relief reduces sharp bends at the connector. This lowers the risk of damage during installation. The connectors are straight RJ-45 male to male.

Plug and Play Compatibility

The cable is plug and play. It uses stranded copper conductors for flexibility. The aqua colour aids quick identification in dense racks. It is CE and RoHS compliant.

Box contents

• 1 x StarTech.com 1m Aqua Cat6a S/FTP LSZH Patch Cable with snagless RJ-45 connectors

Check before you buy

• Confirm your switch or NIC supports 10GBase-T.
• Verify PoE++ (802.3bt) power sourcing equipment is available.
• Check UKCA or CE marking requirements for your site.
• Confirm the cable length fits your rack layout.

Frequently Asked Questions

Q: Is this cable shielded?

A: Yes, it uses S/FTP (S-STP) shielding for EMI and noise protection.

Q: Does it support 100W PoE++?

A: Yes, it supports PoE++ (IEEE 802.3bt-2018) up to 100 W.

Q: Is the jacket LSZH?

A: Yes, it is Low Smoke Zero Halogen for safer indoor use.

Q: Are the connectors snagless?

A: Yes, molded snagless boots protect the RJ-45 latch.

Q: Is this cable compliant with UK standards?

A: It is CE and RoHS compliant. Confirm UKCA if required by your site.

The Consultant’s verdict & warranty

Buy this cable if you need a short, shielded 10GbE patch with PoE++ and LSZH safety for UK indoor racks. It suits network engineers, IT facilities, and installers prioritising reliability and compliance. Covered by the standard Manufacturer Warranty.