Cables Direct FB1M-LCSC-020D InfiniBand Cable 2m LC Aqua

Cables Direct FB1M-LCSC-020D | 2m OM3 LC-to-LC Aqua Fibre

The Cables Direct FB1M-LCSC-020D InfiniBand/fibre optic cable 2 m LC Aqua colour is a multi-mode patch lead designed for short-reach data centre and enterprise links. It uses LC connectors and OM3 grading for 10 Gbps support. This cable is built for technicians who need predictable performance in rack-to-rack links. Because it is OM3, it offers higher bandwidth than older OM2 cables. Also, the aqua jacket provides instant visual identification in dense patch panels.

Cables Direct FB1M-LCSC-020D InfiniBand/fibre optic cable 2 m LC Aqua colour

This specific model provides a 2-metre run with LC male connectors at both ends. It is full duplex and uses a 50 µm core with 125 µm cladding. The low smoke zero halogen (LSZH) jacket suits environments where safety standards matter. In practice, the UPC polish helps maintain a return loss of 35 dB. So, it is suitable for OM3-rated multi-mode applications.

Slim Specs Table

OM3 Bandwidth for 10 Gbps Links

This OM3 cable supports higher bandwidth than OM2 for 10 Gbps Ethernet. Because the core is 50 µm, it enables reliable transmission over typical rack distances. Also, the 0.3 dB insertion loss helps preserve signal integrity. So, it suits short-reach links in modern networks.

LC Connectors for High-Density Patching

LC connectors offer a small form factor for high-density patch panels. Because both connectors are LC male, they plug directly into LC ports. Also, the UPC polish reduces back reflection in multi-mode systems. So, you can achieve clean connections in structured cabling.

LSZH Jacket for Safer Installations

The low smoke zero halogen jacket limits toxic fumes during combustion. Because it does not contain halogen, it aligns with many building safety practices. Also, the round 3 mm diameter supports flexible routing. So, it is suitable for indoor cable trays and racks.

Aqua Colour for Easy Identification

The aqua colour identifies OM3-grade multi-mode fibre at a glance. Because standards use colour coding, technicians can avoid mismatches. Also, the 2 m length reduces slack in tight racks. So, you can speed up audits and maintenance.

Full Duplex Design for Bidirectional Traffic

This cable is full duplex, allowing simultaneous transmit and receive paths. Because it uses two fibres within one jacket, it supports standard duplex topologies. Also, the 35 dB return loss suits OM3 performance expectations. So, it works for switch-to-server or switch-to-switch links.

Box contents

• 1 x Cables Direct FB1M-LCSC-020D InfiniBand/fibre optic cable 2 m LC Aqua colour (LSZH, OM3, LC male to LC male, full duplex)

Check before you buy

• Confirm your equipment uses LC multi-mode ports (not LC single-mode or SC).
• Verify the required cable length for your rack layout to avoid excess slack.
• Check that your network devices support OM3 10 Gbps multi-mode standards.
• Confirm local compliance markings (UKCA/CE) if required by your site policy.

Frequently Asked Questions

Q: Is this cable single-mode or multi-mode?

A: It is multi-mode OM3 with a 50 µm core and 125 µm cladding.

Q: Are the connectors LC and male?

A: Yes, both connectors are LC male, designed for LC female ports.

Q: What is the jacket material?

A: The jacket is low smoke zero halogen (LSZH) and does not contain halogen.

Q: What is the insertion loss?

A: The specified insertion loss is 0.3 dB for this cable.

Q: Is this cable full duplex?

A: Yes, it is full duplex for simultaneous bidirectional transmission.

Q: What does the aqua colour indicate?

A: Aqua typically identifies OM3 multi-mode fibre for easy visual recognition.

The Consultant’s verdict & warranty

This cable suits technicians installing short OM3 multi-mode links with LC ports. It is a practical choice for 10 Gbps rack-to-rack connections in data centres or enterprise closets. Covered by the standard Manufacturer Warranty.