Allied Telesis B-AT-SPFX/2-90 Fibre Optic SFP Transceiver, 100Mbps Fast Ethernet, Multimode, LC, 2km
£103.38
Out of stock
Out of stock
Order now, get it by Tue 17 Nov
-
DPD tracked delivery
-
Buy now, pay later with Klarna at checkout
-
Pay in 3 instalments with PayPal at checkout
About this item
- 100 Mbps Fast Ethernet over multimode fibre
- Maximum transfer distance of 2 km
- LC connector with 1310 nm wavelength
- Hot-swappable SFP form factor
- Full-duplex 100BASE connectivity
- MSA-compliant for compatible SFP platforms
You may also like
StarTech.com Gigabit Ethernet to SC Fibre Media Converter, Single-Mode, 1310nm, 10km
In stock
StarTech.com HPE J4859C Compatible SFP Module 1GbE 10km LC Singlemode/Multimode Fibre Optic Transceiver
In stock
StarTech.com HPE J9150D Compatible SFP+ Module 10GbE Multi-Mode LC Transceiver 300m 850nm Silver
In stock
Allied Telesis B-AT-SPFX/2-90 – Extend Fast Ethernet over fibre
The Allied Telesis B-AT-SPFX/2-90 suits network managers connecting compatible equipment over multimode fibre. Its 2km maximum reach helps extend a 100Mbps Fast Ethernet link between network points.
Essential specifications
| Metric | Specification |
|---|---|
| Interface | SFP |
| Ethernet speed | 100Mbps Fast Ethernet |
| Fibre type | Multimode |
| Connector | LC |
| Maximum distance | 2km |
| Duplex | Full duplex |
A practical link for multimode fibre
This transceiver uses 1310nm transmit and receive wavelengths with an LC connector. It supports 100BASE fibre Ethernet over multimode fibre, making it suitable for compatible Fast Ethernet connections.
The maximum transfer distance is 2km. Actual link suitability depends on the fibre path and connected equipment.
Simple installation and flexible use
The module is plug and play and hot-swappable. It fits an SFP slot, so you can install or replace it without powering down compatible equipment.
It is MSA-compliant, allowing use with MSA-compliant platforms that support SFP uplink connections. Its operating temperature range is 0°C to 70°C.
Check before ordering
- Confirm your equipment has an SFP slot that supports 100Mbps Fast Ethernet.
- Check that both ends of the link use compatible multimode fibre and LC connections.
- Confirm the fibre route is within the 2km maximum distance.
- Check that your platform supports MSA-compliant SFP modules.
Frequently Asked Questions
Q: What fibre type does this transceiver support?
A: It supports multimode fibre and does not support single-mode fibre.
Q: What is the maximum transfer distance?
A: The maximum transfer distance is 2km.
Q: Can we replace the module while equipment is running?
A: Yes. The transceiver is hot-swappable.
A good fit for compatible Fast Ethernet links
Choose the Allied Telesis B-AT-SPFX/2-90 when you need a hot-swappable, 100Mbps SFP for an LC multimode fibre link up to 2km. It is designed for compatible equipment with an SFP slot.
| Performance | |
|---|---|
| SFP transceiver type | Fibre optic |
| Tx wavelength (max) | 1310 nm |
| Rx wavelength (max) | 1310 nm |
| Link budget | 11 dB |
| Fibre optic connector | LC |
| Maximum transfer distance | 2000 m |
| Duplex system | Full |
| Maximum data transfer rate | 100 Mbit/s |
| Interface type | SFP |
| Single-mode fibre (SMF) supported | No |
| Multi-mode fibre (MMF) supported | Yes |
| Ethernet interface type | Fast Ethernet |
| Fibre ethernet cabling technology | 100BASE |
| Easy to install | Yes |
| Product colour | Metallic |
| Plug and Play | Yes |
| Hot-swap | Yes |
| Features | |
| Easy to install | Yes |
| Product colour | Metallic |
| Plug and Play | Yes |
| Hot-swap | Yes |
| Form factor | SFP |
| RX sensitivity | -31 dB |
| Certificates | |
| Compliance certificates | Trade Agreements Act (TAA) |
| Operational conditions | |
| Operating temperature | 0 - 70 °C |
| Storage temperature | -40 - 85 °C |
| Operating relative humidity | 0 - 85% |
| Storage relative humidity | 0 - 80% |
| Minimum operating temperature | 0 °C |
| Maximum operating temperature | 70 °C |
| Network | |
| SFP transceiver type | Fibre optic |
| Fibre optic connector | LC |
| Maximum data transfer rate | 100 Mbit/s |
| Interface type | SFP |
| Ethernet interface type | Fast Ethernet |
| Packaging content | |
| Quantity per pack | 1 pc |
| Technical details | |
| Plug and Play | Yes |
| Hot-swap | Yes |
| Maximum transfer distance | 2000 m |
| Duplex system | Full |
| Compliance certificates | Trade Agreements Act (TAA) |
| Logistics data | |
| Quantity per pack | 1 pc |
| Other features | |
| RX sensitivity | -31 dB |
| Transmit power range | -20 - -14 dBmW |
Reviews
Clear filtersThere are no reviews yet.