Draytek POE600-K PoE Injector Accessory

DrayTek POE600-K | High-Power PoE Injector for VigorAP

The Draytek POE600-K wireless access point accessory PoE injector is designed to power specific DrayTek outdoor access points. It supports the VigorAP 918RPD and VigorAP 920RPD models. This unit enables a single Ethernet cable to deliver both data and power. It is suitable for indoor environments. You can use it to power an additional PoE device from the access point’s secondary port.

Optimise Outdoor AP Power Delivery

This injector powers the VigorAP 918RPD directly. It also provides up to 16 watts of power output to a connected device. This capability uses the VigorAP’s PoE Out port. You can connect a network camera or daisy-chain another AP. The signal runs over a 100-meter CAT5e or CAT6 cable. This setup reduces the need for separate power outlets at the antenna pole.

Compact Form Factor for Installations

The injector features a small footprint. It measures 58 mm in width and 41 mm in height. The weight is 235 g. This compact size aids installation in tight spaces. It fits well within indoor cabinets or near mounting points. The black colour blends with standard network hardware.

Single-Unit Deployment Flexibility

The product ships as one piece per pack. This quantity suits single-link installations. You can deploy it for a specific outdoor AP link. It supports a secondary LAN port connection. This allows power delivery through a single cable run. No extra power bricks are needed at the remote device.

Box contents

• 1 x DrayTek VigorPoE-600 High-Power PoE Injector (Black)

Check before you buy

• Confirm compatibility with your specific DrayTek access point model.
• Verify the secondary LAN port on your VigorAP supports PoE-PSE output.
• Check that your connected device requires up to 16 watts power.
• Ensure you have a standard UK power outlet available for the injector.

Frequently Asked Questions

Q: Is the Draytek POE600-K compatible with other DrayTek APs?

A: It is specified for the VigorAP 918RPD and VigorAP 920RPD only.

Q: Can this injector power a standard PoE camera?

A: Yes, if the camera requires up to 16 watts over PoE.

Q: What cable length is supported?

A: It supports runs up to 100 metres using CAT5e or CAT6 cable.

Q: Is this suitable for outdoor use directly?

A: The input states suitability for indoor use. Confirm outdoor enclosure needs.

Q: Does this include a UK power plug?

A: The input does not specify the plug type. Verify with the distributor.

The Consultant’s verdict & warranty

Buy this injector if you deploy VigorAP 918RPD or 920RPD units and need to power a nearby camera or second AP via a single cable. It simplifies cabling and reduces power points. Covered by the standard Manufacturer Warranty.