Vision TC-HDMIIP/3 HDMI-over-IP AV Transmitter, 1920 x 1200 at 60Hz, H.265, Black

SKU: TC-HDMIIPTX/3

Original price was: £119.99.Current price is: £112.92.

In stock

In stock

  • Free Premium delivery on UK mainland orders

Order today, get it by Fri 20 Nov

  • DPD DPD tracked delivery
  • Klarna Buy now, pay later with Klarna at checkout
  • PayPal Pay in 3 instalments with PayPal at checkout

About this item

  • 1920 x 1200 at 60 Hz with H.265 compression
  • HDCP 1.4 compliant with 12-bit colour depth
  • RJ-45 connection supports Cat5e and Cat6 cabling
  • IR pass-through enables source control from the display
  • Multicasts one source to over 100 receivers
  • Transmitter measures 92 x 67 x 168 mm
  • Transmitter weighs 150 g
Description

Vision TC-HDMIIP/3 – Share one HDMI source across screens

We recommend the Vision TC-HDMIIP/3 for offices and digital signage setups that need to distribute HDMI over a LAN. Its multicast support lets one transmitter send a source to more than 100 receivers, with one display per receiver.

Vision TC-HDMIIP/3 key specs

Metric Specification
Maximum resolution 1920 x 1200 (WUXGA)
Maximum refresh rate 60 Hz
Video compression H.265
HDCP Version 1.4
Supported network cable Cat5e or Cat6
Bandwidth 6.75 Gbit/s

Extend a source across your network

The transmitter converts HDMI into TCP/IP packets for delivery over a standard LAN. All endpoints must be on the same subnet. We recommend using a dedicated network for the system.

A standard unmanaged switch can connect the endpoints, so advanced switch configuration is not required. Each transmitter and receiver needs its own power supply. This system does not use PoE.

For a direct connection without a LAN, connect the transmitter to a receiver using Cat6 cable. A point-to-point link can reach up to 150 metres with a high-quality cable.

Clear video, audio and source control

H.265 compression carries video at up to 1920 x 1200 and 60 Hz. Digital audio encoded in the HDMI signal also travels to the display.

EDID passes through automatically to help the source and display work together. For advanced setups, the reset buttons can copy the display’s EDID to the transmitter.

IR pass-through lets you control the source device from the display end. The system supports standard 20–60 kHz IR signals.

Add USB peripherals at the display

The system supports USB 1.1 from the transmitter to receivers. Each receiver has two USB ports for peripherals such as a keyboard or mouse. This is not intended for high-bandwidth uses such as interactive displays.

You can add receivers as your setup grows. However, each network supports only one transmitter. For separate sources on the same physical LAN, use VLANs to keep the systems apart. They do not form a matrix.

Included for IR control

  • IR blaster and receiver cable

Check your setup before ordering

  • Confirm your source outputs HDMI and your displays can show up to 1920 x 1200 at 60 Hz.
  • Check that your network endpoints can share the same subnet.
  • Confirm that you have a separate power supply for each transmitter and receiver.
  • Check that your receivers belong to the TC-HDMIIP/3 system generation, as this version is not compatible with the previous v2.

Frequently Asked Questions

Q: Can one transmitter serve multiple displays?

A: Yes. It can multicast to more than 100 receivers on the network, with one display per receiver.

Q: Can I connect a transmitter directly to a receiver?

A: Yes. A direct Cat6 connection can reach up to 150 metres with a high-quality cable.

Q: Does the system need a managed switch?

A: No. A standard unmanaged switch can be used, and all endpoints must be on the same subnet.

Q: Does it pass audio and IR?

A: Yes. It transmits digital audio carried by HDMI and supports 20–60 kHz IR pass-through.

A practical choice for multi-screen AV

Choose the Vision TC-HDMIIP/3 when you need to distribute one HDMI source across multiple network-connected displays. Its H.265 video, IR control and straightforward network setup suit signage and shared-screen installations.

Specifications
Features
HDCPYes
Colour depth12 bit
IR pass-throughYes
Maximum refresh rate60 Hz
Video compression formatsH.265
TypeAV transmitter
Maximum resolution1920 x 1200 pixels
Cable types supportedCat5e, Cat6
Supported graphics resolutions1920 x 1200 (WUXGA)
Cable length1.5 m
Bandwidth6.75 Gbit/s
Product colourBlack
HDCP version1.4
Technical details
HDCPYes
Colour depth12 bit
IR pass-throughYes
Maximum refresh rate60 Hz
Video compression formatsH.265
TypeAV transmitter
Maximum resolution1920 x 1200 pixels
Cable types supportedCat5e, Cat6
Supported graphics resolutions1920 x 1200 (WUXGA)
Cable length1.5 m
Bandwidth6.75 Gbit/s
Product colourBlack
Connectivity technologyWired
Compliance certificatesRoHS
Ports & interfaces
USB connector typeUSB Type-A, USB Type-B
RJ-45 input ports1
Connectivity technologyWired
Power
AC input voltage100 - 240 V
AC input frequency50 / 60 Hz
Operational conditions
Operating relative humidity20 - 90%
Operating temperature10 - 50 °C
Weight & dimensions
Transmitter weight150 g
Width92 mm
Transmitter dimensions (WxDxH)92 x 67 x 168 mm
Height168 mm
Depth67 mm
Weight150 g

Reviews

0 reviews
0
0
0
0
0

There are no reviews yet.

Write a review

Your email is never published.

You have to be logged in to be able to add photos to your review.