Origin Storage SSD 240GB 3.5in SATA 1DWPD in Hot-Swap Caddy for HPE ProLiant DL/ML G3-G7
£479.03
In stock
In stock
- Free Premium delivery on UK mainland orders
Order now, get it by Fri 20 Nov
-
DPD tracked delivery
-
Buy now, pay later with Klarna at checkout
-
Pay in 3 instalments with PayPal at checkout
About this item
- 240GB MLC solid-state storage
- Read speeds up to 330MB/s
- Write speeds up to 300MB/s
- 6Gbit/s Serial ATA interface
- 3.5-inch hot-swap form factor with caddy
- Designed for server and workstation use
- 256-bit AES hardware encryption and five-year warranty
You may also like
Origin Storage 240GB SATA SSD – hot-swap storage for servers
The Origin Storage 240GB SATA SSD suits server and workstation users who need a hot-swappable drive. Its supplied caddy supports installation in a 3.5-inch bay designed for hot-swap storage.
Key specifications at a glance
| Metric | Specification |
|---|---|
| Capacity | 240 GB |
| Interface | SATA, 6 Gbit/s |
| Read and write speeds | 330 MB/s read, 300 MB/s write |
| NAND flash | MLC |
| Form factor | 3.5-inch |
| Warranty | 5 years |
Replace drives with less disruption
Hot-swap support lets you remove and replace the drive in a compatible system without treating it like a standard internal desktop installation. The caddy is intended for server and workstation use, so check that it matches your system’s bay.
The drive supports RAID, S.M.A.R.T. monitoring and TRIM. These features can help with storage management in a compatible setup. It also supports hardware encryption using 256-bit AES.
Designed for SATA workloads
The SATA interface transfers data at up to 6 Gbit/s. Rated speeds are 330 MB/s for reads and 300 MB/s for writes. For random 4KB tasks, it reaches 86,000 read IOPS and 9,000 write IOPS.
MLC flash and 130 µs read and write latency make this a practical option for supported server and workstation workloads. Its 240GB capacity is best suited to operating systems, applications or focused storage tasks.
Included for fitting
- Hot-swap caddy
- 2.5-inch to 3.5-inch storage drive adapter
Check your system before ordering
- Confirm your server or workstation uses a SATA drive interface.
- Check that its bay accepts the supplied 3.5-inch hot-swap caddy.
- Confirm that your system supports hot-swap operation.
- Check that 240GB meets your storage requirements.
Frequently Asked Questions
Q: What capacity does this SSD provide?
A: It provides 240GB of storage.
Q: Does it support hot swapping?
A: Yes. It is designed for hot-swap use in a compatible server or workstation.
Q: Does the drive support hardware encryption?
A: Yes. It supports hardware encryption with 256-bit AES.
Q: What warranty does it include?
A: It includes a five-year warranty.
A practical choice for compatible systems
Choose the Origin Storage 240GB SATA SSD for a server or workstation that needs a SATA drive with a hot-swap caddy. Its 240GB capacity, RAID support and five-year warranty suit buyers seeking a focused storage upgrade.
| Hard drive | |
|---|---|
| SSD capacity | 240 GB |
| Memory type | MLC |
| Internal | Yes |
| Data transmission | |
| Read speed | 330 MB/s |
| Write speed | 300 MB/s |
| Random write (4KB) | 9000 IOPS |
| Random read (4KB) | 86000 IOPS |
| Write latency | 130 µs |
| Read latency | 130 µs |
| Data transfer rate | 6 Gbit/s |
| Design | |
| Internal | Yes |
| Component for | Server/workstation |
| Product colour | Black |
| SSD form factor | 3.5" |
| Security | |
| Security algorithms | 256-bit AES |
| Endurance | |
| Mean time between failures (MTBF) | 2000000 h |
| Features | |
| Interface | Serial ATA |
| Component for | Server/workstation |
| NVMe | No |
| NAND flash type | MLC (Multi Level Cell) |
| Hot-swap | Yes |
| SSD capacity | 240 GB |
| Security algorithms | 256-bit AES |
| S.M.A.R.T. support | Yes |
| Read speed | 330 MB/s |
| TRIM support | Yes |
| RAID support | Yes |
| Write speed | 300 MB/s |
| Memory type | MLC |
| Random write (4KB) | 9000 IOPS |
| Random read (4KB) | 86000 IOPS |
| Mean time between failures (MTBF) | 2000000 h |
| Write latency | 130 µs |
| Read latency | 130 µs |
| Hardware encryption | Yes |
| Data transfer rate | 6 Gbit/s |
| SSD form factor | 3.5" |
| Harmonized System (HS) code | 84717070 |
| Power | |
| Power consumption (idle) | 1.3 W |
| Performance | |
| Interface | Serial ATA |
| Component for | Server/workstation |
| NVMe | No |
| NAND flash type | MLC (Multi Level Cell) |
| Hot-swap | Yes |
| SSD capacity | 240 GB |
| Security algorithms | 256-bit AES |
| S.M.A.R.T. support | Yes |
| Read speed | 330 MB/s |
| TRIM support | Yes |
| RAID support | Yes |
| Write speed | 300 MB/s |
| Memory type | MLC |
| Random write (4KB) | 9000 IOPS |
| Random read (4KB) | 86000 IOPS |
| Mean time between failures (MTBF) | 2000000 h |
| Write latency | 130 µs |
| Read latency | 130 µs |
| Hardware encryption | Yes |
| Data transfer rate | 6 Gbit/s |
| Weight & dimensions | |
| Width | 69.8 mm |
| Weight | 54.34 g |
| Height | 7 mm |
| Depth | 100.5 mm |
| Packaging data | |
| Storage drive adapter included | Yes |
| Storage drive adapter type | 2.5" - 3.5" |
| Operational conditions | |
| Operating temperature | 0 - 70 °C |
| Operating shock | 1500 G |
| Non-operating shock | 1500 G |
| Operating vibration | 20 G |
| Non-operating vibration | 20 G |
| Technical details | |
| Interface | Serial ATA |
| Hot-swap | Yes |
| S.M.A.R.T. support | Yes |
| Operating temperature | 0 - 70 °C |
| TRIM support | Yes |
| RAID support | Yes |
| Operating shock | 1500 G |
| Non-operating shock | 1500 G |
| Operating vibration | 20 G |
| Non-operating vibration | 20 G |
| Hardware encryption | Yes |
| Product colour | Black |
| SSD form factor | 3.5" |
| Warranty period | 5 years |
| Other features | |
| Product colour | Black |
| Internal | Yes |
| Warranty period | 5 years |
| Packaging content | |
| Storage drive adapter included | Yes |
| Storage drive adapter type | 2.5" - 3.5" |
| Logistics data | |
| Harmonized System (HS) code | 84717070 |

Reviews
Clear filtersThere are no reviews yet.