Origin Storage 480GB 3.5″ SATA eMLC SSD, 1 DWPD, Hot-Swap Caddy for Dell Servers
£779.56
In stock
In stock
Order now, get it by Tue 17 Nov
-
DPD tracked delivery
-
Buy now, pay later with Klarna at checkout
-
Pay in 3 instalments with PayPal at checkout
About this item
- 480GB eMLC SSD with 1 DWPD endurance
- 520MB/s read and 500MB/s write speeds
- 6Gbit/s SATA interface for Dell servers
- 3.5-inch form factor with hot-swap caddy
- Supports Windows and Linux operating systems
- Covered by a five-year warranty
You may also like
Team Group NV5000 500GB M.2 PCIe 4.0 NVMe SSD
In stock
Origin Storage 480GB eMLC SSD – hot-swap storage for Dell servers
We recommend the Origin Storage 480GB eMLC SSD for Dell server and workstation users who need replaceable SATA storage. Its hot-swap caddy supports drive changes without removing the SSD from the server.
Key specifications at a glance
| Metric | Specification |
|---|---|
| Capacity and memory | 480GB eMLC |
| Form factor | 3.5-inch |
| Interface | SATA, 6 Gbit/s |
| Sequential read and write | Up to 520MB/s read, 500MB/s write |
| Endurance | 1 DWPD |
| Caddy | Hot-swap caddy included |
Replace the drive without removing the caddy
The 3.5-inch form factor and included hot-swap caddy suit compatible Dell server bays. This can make drive replacement more straightforward when a server supports hot-swappable SATA storage.
Check the bay and server requirements before ordering. The drive uses SATA, not NVMe, so it is intended for a compatible SATA connection.
Built for server workloads
The eMLC NAND and 1 DWPD endurance rating make this SSD suitable for server use. It supports RAID and S.M.A.R.T., useful capabilities when managing storage in a compatible system.
For small, random operations, it delivers up to 97,000 4KB read IOPS and 16,000 4KB write IOPS. Sequential speeds reach 520MB/s read and 500MB/s write.
Encryption and operating system support
The SSD supports 256-bit AES security algorithms, along with TRIM. It is compatible with Windows and Linux operating systems, subject to the server configuration.
Check the fit before ordering
- Confirm your Dell server supports a 3.5-inch SATA hot-swap drive.
- Check that the server’s drive bay accepts the included caddy.
- Confirm your storage controller supports SATA drives and your intended RAID setup.
- Check that 480GB capacity suits your server’s storage requirements.
Frequently Asked Questions
Q: Which interface does this SSD use?
A: It uses a Serial ATA interface with a data transfer rate of 6 Gbit/s.
Q: Is the caddy included?
A: Yes. The SSD comes with a hot-swap caddy for compatible Dell servers.
Q: Does it support RAID?
A: Yes, RAID support is listed. Check that your server controller supports your intended configuration.
Q: What warranty does it have?
A: It has a five-year warranty.
A practical choice for compatible Dell servers
Choose the Origin Storage 480GB eMLC SSD if you need 3.5-inch SATA storage with a hot-swap caddy for a compatible Dell server. Its eMLC memory, 1 DWPD endurance rating and RAID support suit server storage needs.
| Hard drive | |
|---|---|
| SSD capacity | 480 GB |
| Memory type | eMLC |
| Access time | 0.1 ms |
| Internal | Yes |
| Performance | |
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Interface | Serial ATA |
| Component for | Server/workstation |
| Maximum write (4KB) | 16000 IOPS |
| Maximum read (4KB) | 97000 IOPS |
| NVMe | No |
| NAND flash type | MLC (Multi Level Cell) |
| Random read (8KB) | 55000 IOPS |
| Random write (8KB) | 11000 IOPS |
| Hot-swap | Yes |
| SSD capacity | 480 GB |
| Security algorithms | 256-bit AES |
| S.M.A.R.T. support | Yes |
| Read speed | 520 MB/s |
| TRIM support | Yes |
| RAID support | Yes |
| Write speed | 500 MB/s |
| Memory type | eMLC |
| Random write (4KB) | 16000 IOPS |
| Random read (4KB) | 97000 IOPS |
| Mean time between failures (MTBF) | 2000000 h |
| Write latency | 130 µs |
| Read latency | 130 µs |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| Access time | 0.1 ms |
| Compatible products | Dell Server |
| Data transmission | |
| Read speed | 520 MB/s |
| Write speed | 500 MB/s |
| Random write (4KB) | 16000 IOPS |
| Random read (4KB) | 97000 IOPS |
| Write latency | 130 µs |
| Read latency | 130 µs |
| Data transfer rate | 6 Gbit/s |
| Design | |
| Internal | Yes |
| Component for | Server/workstation |
| SSD form factor | 3.5" |
| Security | |
| Security algorithms | 256-bit AES |
| Endurance | |
| Mean time between failures (MTBF) | 2000000 h |
| Features | |
| Interface | Serial ATA |
| Component for | Server/workstation |
| Maximum write (4KB) | 16000 IOPS |
| Maximum read (4KB) | 97000 IOPS |
| NVMe | No |
| NAND flash type | MLC (Multi Level Cell) |
| Random read (8KB) | 55000 IOPS |
| Random write (8KB) | 11000 IOPS |
| Hot-swap | Yes |
| SSD capacity | 480 GB |
| Windows operating systems supported | Yes |
| Security algorithms | 256-bit AES |
| S.M.A.R.T. support | Yes |
| Read speed | 520 MB/s |
| TRIM support | Yes |
| RAID support | Yes |
| Write speed | 500 MB/s |
| Linux operating systems supported | Yes |
| Memory type | eMLC |
| Random write (4KB) | 16000 IOPS |
| Random read (4KB) | 97000 IOPS |
| Mean time between failures (MTBF) | 2000000 h |
| Write latency | 130 µs |
| Read latency | 130 µs |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| Access time | 0.1 ms |
| SSD form factor | 3.5" |
| Compatible products | Dell Server |
| Harmonized System (HS) code | 84717070 |
| Power | |
| Power consumption (average) | 3 W |
| Weight & dimensions | |
| Width | 69.8 mm |
| Weight | 60 g |
| Height | 7 mm |
| Depth | 100.5 mm |
| Packaging data | |
| Storage drive adapter included | Yes |
| System requirements | |
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Operational conditions | |
| Operating temperature | 0 - 70 °C |
| Storage temperature | -40 - 85 °C |
| Operating relative humidity | 5 - 95% |
| Operating shock | 1500 G |
| Non-operating shock | 1500 G |
| Operating vibration | 20 G |
| Non-operating vibration | 20 G |
| Technical details | |
| Interface | Serial ATA |
| Hot-swap | Yes |
| S.M.A.R.T. support | Yes |
| Operating temperature | 0 - 70 °C |
| TRIM support | Yes |
| RAID support | Yes |
| Storage temperature | -40 - 85 °C |
| Operating relative humidity | 5 - 95% |
| Operating shock | 1500 G |
| Non-operating shock | 1500 G |
| Operating vibration | 20 G |
| Non-operating vibration | 20 G |
| Hardware encryption | No |
| SSD form factor | 3.5" |
| Warranty period | 5 years |
| Compliance certificates | RoHS |
| Software | |
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Other features | |
| Internal | Yes |
| Compatible products | Dell Server |
| Warranty period | 5 years |
| Compliance certificates | RoHS |
| Packaging content | |
| Storage drive adapter included | Yes |
| Logistics data | |
| Harmonized System (HS) code | 84717070 |
Reviews
Clear filtersThere are no reviews yet.