Origin Storage 960GB SATA eMLC SSD, 3.5″, 1 DWPD, Hot-Swap Caddy for Server/Workstation
£1,193.51
In stock
In stock
Order today, get it by Mon 16 Nov
-
DPD tracked delivery
-
Buy now, pay later with Klarna at checkout
-
Pay in 3 instalments with PayPal at checkout
About this item
- 960GB eMLC SSD with 1 DWPD endurance
- Read speeds up to 520MB/s
- Write speeds up to 480MB/s
- SATA interface with 6Gbit/s transfer rate
- 3.5-inch hot-swap form factor for servers and workstations
- Five-year warranty
You may also like
Origin Storage 256GB SATA SSD for PC/Laptop, 3D TLC, 550MB/s Read, 500MB/s Write
In stock
Origin Storage 3D TLC SATA SSD, 550MB/s Read, 500MB/s Write, for PC and Laptop
In stock
ADATA Legend 700 256GB NVMe M.2 2280 Internal SSD PCIe 3.0 x4
In stock
Origin Storage 960GB eMLC SSD – hot-swap server storage
The Origin Storage 960GB eMLC SSD suits server and workstation upgrades that need a 3.5-inch SATA drive. Its hot-swap caddy supports drive replacement without removing the drive from the system.
Key specifications for your upgrade
| Metric | Specification |
|---|---|
| Capacity | 960GB |
| NAND flash | eMLC |
| Interface | SATA, up to 6 Gbit/s |
| Sequential read speed | Up to 520MB/s |
| Sequential write speed | Up to 480MB/s |
| Form factor | 3.5-inch, hot-swap |
Designed for server and workstation use
This drive is intended for server and workstation systems, with RAID support for compatible configurations. It also supports S.M.A.R.T. monitoring, which helps compatible systems report drive health information. TRIM support is included as well.
The drive is rated at 1 DWPD. This makes it a practical option for supported workloads that require regular writes, while eMLC flash is suited to enterprise storage applications.
A caddy for hot-swap installation
The 3.5-inch format and hot-swap caddy are useful when replacing or adding a drive in a compatible system. An included adapter accommodates a 2.5-inch drive in a 3.5-inch bay. However, check your system’s drive tray and caddy requirements before ordering.
At 6 Gbit/s, the SATA interface provides the connection for systems with a compatible SATA drive bay. This is a SATA SSD, not an NVMe drive, so check the interface your server or workstation uses.
Check fit before you order
- Confirm your server or workstation supports a SATA SSD.
- Check that your system accepts the 3.5-inch hot-swap caddy.
- Confirm your drive bay supports hot-swap operation.
- Check that your RAID setup supports this drive configuration.
Frequently Asked Questions
Q: What capacity does this SSD provide?
A: It provides 960GB of storage.
Q: Is this an NVMe drive?
A: No. It uses a Serial ATA interface, with a data transfer rate of up to 6 Gbit/s.
Q: Does the drive support hot-swap?
A: Yes. It is supplied in a hot-swap caddy for compatible systems.
Q: What warranty does it include?
A: It has a five-year warranty.
A considered choice for compatible systems
Choose the Origin Storage 960GB eMLC SSD for a server or workstation that needs SATA storage, hot-swap support and 960GB capacity. We recommend confirming your system’s caddy and interface requirements before ordering.
| Hard drive | |
|---|---|
| SSD capacity | 960 GB |
| Memory type | eMLC |
| Internal | Yes |
| Data transmission | |
| Read speed | 520 MB/s |
| Write speed | 480 MB/s |
| Random write (4KB) | 24000 IOPS |
| Random read (4KB) | 97000 IOPS |
| Write latency | 130 µs |
| Read latency | 130 µs |
| Data transfer rate | 6 Gbit/s |
| Design | |
| Internal | Yes |
| Component for | Server/workstation |
| SSD form factor | 3.5" |
| Security | |
| Security algorithms | 256-bit AES |
| Endurance | |
| Mean time between failures (MTBF) | 2000000 h |
| Features | |
| Interface | Serial ATA |
| Component for | Server/workstation |
| NVMe | No |
| NAND flash type | eMLC (Enterprise Multi Level Cell) |
| Hot-swap | Yes |
| SSD capacity | 960 GB |
| Security algorithms | 256-bit AES |
| S.M.A.R.T. support | Yes |
| Read speed | 520 MB/s |
| TRIM support | Yes |
| RAID support | Yes |
| Write speed | 480 MB/s |
| Memory type | eMLC |
| Random write (4KB) | 24000 IOPS |
| Random read (4KB) | 97000 IOPS |
| Mean time between failures (MTBF) | 2000000 h |
| Write latency | 130 µs |
| Read latency | 130 µs |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| SSD form factor | 3.5" |
| Harmonized System (HS) code | 84717070 |
| Power | |
| Power consumption (average) | 3 W |
| Performance | |
| Interface | Serial ATA |
| Component for | Server/workstation |
| NVMe | No |
| NAND flash type | eMLC (Enterprise Multi Level Cell) |
| Hot-swap | Yes |
| SSD capacity | 960 GB |
| Security algorithms | 256-bit AES |
| S.M.A.R.T. support | Yes |
| Read speed | 520 MB/s |
| TRIM support | Yes |
| RAID support | Yes |
| Write speed | 480 MB/s |
| Memory type | eMLC |
| Random write (4KB) | 24000 IOPS |
| Random read (4KB) | 97000 IOPS |
| Mean time between failures (MTBF) | 2000000 h |
| Write latency | 130 µs |
| Read latency | 130 µs |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| Weight & dimensions | |
| Width | 69.8 mm |
| Weight | 60 g |
| Height | 7 mm |
| Depth | 100.5 mm |
| Packaging data | |
| Storage drive adapter included | Yes |
| Storage drive adapter type | 2.5" - 3.5" |
| Operational conditions | |
| Operating shock | 1500 G |
| Non-operating shock | 1500 G |
| Operating vibration | 20 G |
| Non-operating vibration | 20 G |
| Technical details | |
| Interface | Serial ATA |
| Hot-swap | Yes |
| S.M.A.R.T. support | Yes |
| TRIM support | Yes |
| RAID support | Yes |
| Operating shock | 1500 G |
| Non-operating shock | 1500 G |
| Operating vibration | 20 G |
| Non-operating vibration | 20 G |
| Hardware encryption | No |
| SSD form factor | 3.5" |
| Warranty period | 5 years |
| Other features | |
| Internal | Yes |
| Warranty period | 5 years |
| Packaging content | |
| Storage drive adapter included | Yes |
| Storage drive adapter type | 2.5" - 3.5" |
| Logistics data | |
| Harmonized System (HS) code | 84717070 |
Reviews
Clear filtersThere are no reviews yet.