StarTech.com 4K HDMI over Fibre Extender Kit, 60Hz, 1km Single-Mode/300m Multimode, 7.1-Channel Audio, HDR10

SKU: ST121HD20FXA2

£549.04

In stock

In stock

  • Free Premium delivery on UK mainland orders

Order today, get it by Fri 20 Nov

  • DPD DPD tracked delivery
  • Klarna Buy now, pay later with Klarna at checkout
  • PayPal Pay in 3 instalments with PayPal at checkout

About this item

  • 4K 60Hz video up to 1km single-mode or 300m multimode fibre
  • HDR10 and HDCP 2.2 support
  • 7.1-channel audio with receiver 3.5mm output
  • One HDMI input and two HDMI outputs
  • IR and RS-232 extension with EDID support
  • Transmitter and receiver kit, measuring 68 × 134 × 18mm
Description

StarTech.com 4K HDMI over Fibre Extender Kit – extend 4K over long distances

The StarTech.com 4K HDMI over Fibre Extender Kit suits AV installations where HDMI needs to travel much farther than a direct connection allows. It carries 4K video at up to 60Hz over LC fibre, reaching up to 1km on single-mode fibre.

The essentials

Metric Specification
Maximum resolution and refresh rate 4096 × 2160 at 60Hz
Maximum distance 1km single-mode; 300m multimode
Fibre connector LC
HDR and copy protection HDR10 and HDCP 2.2
Audio Up to 7.1 channels
Bandwidth 18 Gbit/s

Extend video without adding network equipment

The kit includes a transmitter and receiver for a point-to-point connection over single-strand LC fibre. Because it does not require IP configuration, drivers or network equipment, installation can remain straightforward.

Choose single-mode fibre for distances up to 1km, or multimode fibre for runs up to 300m. Fibre is also resistant to electromagnetic interference, which can help in challenging AV environments.

Keep audio and control in reach

The receiver extracts audio from the HDMI signal through its 3.5mm output. It can play audio through HDMI and the 3.5mm output at the same time, giving you more flexibility when connecting audio equipment.

IR and RS-232 extension help you control equipment at the display end. The kit also provides a local HDMI output and EDID copy functions, helping the connected display receive suitable display information.

Check your installation before ordering

  • Confirm your fibre run uses an LC connector and is single-mode or multimode.
  • Check that the fibre distance stays within 1km for single-mode or 300m for multimode.
  • Confirm your source and display support the resolution, refresh rate and HDR format you plan to use.
  • Check whether your installation needs IR or RS-232 control, or audio extraction at the receiver.

In the box

  • HDMI transmitter and receiver
  • IR receiver and IR blaster
  • AC adapter
  • Quick-start guide

Frequently Asked Questions

Q: What is the maximum supported resolution?

A: It supports resolutions up to 4096 × 2160 at 60Hz.

Q: How far can the signal travel?

A: Up to 1km over single-mode fibre or 300m over multimode fibre.

Q: Does the kit support HDR and multichannel audio?

A: Yes. It supports HDR10 and up to 7.1-channel audio.

Q: Can I extract audio at the receiver?

A: Yes. The receiver has a 3.5mm audio output and supports simultaneous playback through HDMI and 3.5mm.

A practical choice for long fibre runs

Choose the StarTech.com 4K HDMI over Fibre Extender Kit when you need 4K 60Hz video across a long LC fibre connection, with audio extraction and remote control options. It comes with a two-year warranty.

Specifications
Features
HDCPYes
Audio output channels7.1 channels
Electrostatic Discharge (ESD) protection8 kV | Yes
Baud rate115.2 Kbit/s
Maximum refresh rate60 Hz
TypeAV transmitter & receiver
Maximum resolution4096 x 2160 pixels
Maximum transfer distance1000 m
LED indicatorsActivity, Power
Bandwidth18 Gbit/s
Product colourBlack
ChipsetSiFotonics SD1503/SD1513
Fibre optic connectorLC
Fibre mode structureMulti-mode, Single-mode
Extended display identification data (EDID)Yes
HDCP version2.2
Infrared (IR) frequency range20 - 60 kHz
High Dynamic Range (HDR) supportedYes
High Dynamic Range (HDR) technologyHigh Dynamic Range 10 (HDR10)
Technical details
HDCPYes
Audio output channels7.1 channels
Electrostatic Discharge (ESD) protection8 kV
Baud rate115.2 Kbit/s
Maximum refresh rate60 Hz
TypeAV transmitter & receiver
Maximum resolution4096 x 2160 pixels
Maximum transfer distance1000 m
Bandwidth18 Gbit/s
Product colourBlack
Connectivity technologyWired
Sustainability complianceYes
Compliance certificatesCE, RoHS
Ports & interfaces
Remote (IR) output2
Remote (IR) input2
Line outputs (RCA)1
USB ports quantity2
Serial ports quantity2
Serial interface typeRS-232
USB connector typeMicro-USB B
HDMI in1
Number of HDMI outputs2
HDMI version2.1
DC-in jackYes
Connectivity technologyWired
Fibre optic connectorLC
Line-inYes
Fibre ports quantity2
Power
Input current0.35 A
Output current1 A
Power plug typeType M
AC input voltage100 - 240 V
Operating voltage5 V
Indication
LED indicatorsActivity, Power
Operational conditions
Operating relative humidity20 - 90%
Storage temperature-20 - 60 °C
Operating temperature0 - 40 °C
Weight & dimensions
Width68 mm
Package depth303 mm
Height18 mm
Depth134 mm
Package width203 mm
Package height65 mm
Weight280 g
Package weight1 kg
Packaging data
Package depth303 mm
Package width203 mm
Package height65 mm
Package weight1 kg
Packaging content
IR receiver includedYes
IR blaster includedYes
Quick start guideYes
AC adapter includedYes
Logistics data
Master (outer) case width331 mm
Master (outer) case length330 mm
Master (outer) case height436 mm
Products per master (outer) case10 pcs

Reviews

0 reviews
0
0
0
0
0

There are no reviews yet.

Write a review

Your email is never published.

You have to be logged in to be able to add photos to your review.