TECWARE Fusion 3 mATX Compact PC Case

TecWare Fusion 3 | High Airflow Compact mATX Case

The TecWare Fusion 3 mATX Compact PC Case delivers efficient airflow in a space-saving chassis, making it ideal for SFF builds where cooling and hardware support matter. With a top-mounted PSU layout and pre-installed fans, this case balances performance and footprint without compromise.

Slim Specs Table

Compact Design, Maximum Airflow

The Fusion 3 uses a mesh front intake to optimise airflow while maintaining a compact footprint. Its top-mounted PSU layout frees up internal space, making it easier to route cables and improve thermals in tight builds.

Pre-Installed Cooling for Immediate Performance

This case ships with three fans: two 120mm at the top and one 90mm at the rear. This setup provides strong out-of-the-box cooling, reducing the need for immediate upgrades in most SFF configurations.

Supports mATX and ITX Builds

With support for both mATX and Mini-ITX motherboards, the Fusion 3 offers flexibility for compact yet capable systems. Four full-size expansion slots allow for discrete GPU installation up to 280mm in length.

Front Panel Connectivity

A USB-C port alongside USB 3.0 and HD audio jacks on the front panel ensures modern connectivity without needing to reach around the case. This is useful for frequent peripheral swaps or VR headset use.

Box Contents

• TecWare Fusion 3 mATX Case
• 2 x 120mm fans (pre-installed)
• 1 x 90mm fan (pre-installed)
• Mounting hardware and screws

Check before you buy

• Confirm your GPU length is under 280mm.
• Verify your CPU cooler height is under 140mm.
• Check PSU dimensions if using SFX; ATX PSUs must fit the top mount.
• Ensure your motherboard is mATX or Mini-ITX.

Frequently Asked Questions

Q: Does this case support liquid cooling?

A: Yes, it supports dual radiators up to 280mm in length.

Q: Are the fans RGB?

A: No, the included fans are standard non-RGB models.

Q: Can I install a 3.5″ HDD and a 2.5″ SSD?

A: Yes, there is one 3.5″ bay and one 2.5″ bay available.

Q: Is a PSU included?

A: No, the PSU is not included and must be purchased separately.

Q: What are the I/O ports on the front?

A: One USB 3.0, one USB-C, and one HD audio jack.

The Consultant’s Verdict & Warranty

The TecWare Fusion 3 is a smart choice for compact mATX or Mini-ITX builds where airflow, GPU support, and clean cable routing are priorities. Its mesh design and pre-installed fans make it ready to use out of the box. Covered by the standard Manufacturer Warranty.