TECWARE Fusion 3 mATX Compact PC Case
Original price was: £55.19.£51.59Current price is: £51.59.
Out of stock
Out of stock
-
DPD tracked delivery
-
Buy now, pay later with Klarna
-
Pay in 3 instalments with PayPal
About This Item
- TECWARE Fusion 3 mATX compact mesh case with high airflow design
- Top-mounted ATX/SFX PSU support for efficient space management
- Pre-installed 2 x 120mm + 1 x 90mm fans for enhanced cooling
- Supports mATX and Mini-ITX motherboards with 280mm GPU clearance
- USB-C and USB 3.0 front panel connectivity for modern peripherals
You may also like
Corsair 2500X White Micro Tower
In stock
DeepCool CC360 ARGB White Mini Tower
In stock
ASUS AP201 Mini Tower Case Black
In stock
MSI MAG FORGE 320R AIRFLOW Micro Tower White ATX Case
In stock
VIDA Lucid White Micro-ATX Gaming PC Case, Tempered Glass
In stock
Corsair 2500X RGB Micro Tower
In stock
VIDA EDGE MINI MATX ARGB White Cube Case
In stock
Fractal Design Pop Mini Air Mini Tower Black ATX Case
In stock
ASUS PRIME AP201 White Mini Tower Case
In stock
DeepCool MATREXX 40 3FS Gaming Case, Black, Tempered Glass
In stock
TecWare Fusion 3 | High Airflow Compact mATX Case
The TecWare Fusion 3 mATX Compact PC Case delivers efficient airflow in a space-saving chassis, making it ideal for SFF builds where cooling and hardware support matter. With a top-mounted PSU layout and pre-installed fans, this case balances performance and footprint without compromise.
Technical Specifications
| Metric | Spec |
|---|---|
| Form Factor | Micro ATX |
| PSU Support | ATX / SFX (top-mounted) |
| GPU Length | Up to 280mm |
| Max CPU Cooler Height | 140mm |
| Dimensions | 168 x 302 x 350 mm |
Compact Design, Maximum Airflow
The Fusion 3 uses a mesh front intake to optimise airflow while maintaining a compact footprint. Its top-mounted PSU layout frees up internal space, making it easier to route cables and improve thermals in tight builds.
Pre-Installed Cooling for Immediate Performance
This case ships with three fans: two 120mm at the top and one 90mm at the rear. This setup provides strong out-of-the-box cooling, reducing the need for immediate upgrades in most SFF configurations.
Supports mATX and ITX Builds
With support for both mATX and Mini-ITX motherboards, the Fusion 3 offers flexibility for compact yet capable systems. Four full-size expansion slots allow for discrete GPU installation up to 280mm in length.
Front Panel Connectivity
A USB-C port alongside USB 3.0 and HD audio jacks on the front panel ensures modern connectivity without needing to reach around the case. This is useful for frequent peripheral swaps or VR headset use.
What Is in the Box
- TecWare Fusion 3 mATX Case
- 2 x 120mm fans (pre-installed)
- 1 x 90mm fan (pre-installed)
- Mounting hardware and screws
Before you order
- Confirm your GPU length is under 280mm.
- Verify your CPU cooler height is under 140mm.
- Check PSU dimensions if using SFX; ATX PSUs must fit the top mount.
- Ensure your motherboard is mATX or Mini-ITX.
Buyer FAQs
Does this case support liquid cooling?
Are the fans RGB?
Can I install a 3.5″ HDD and a 2.5″ SSD?
Is a PSU included?
What are the I/O ports on the front?
Worth knowing before you buy
The TecWare Fusion 3 is a smart choice for compact mATX or Mini-ITX builds where airflow, GPU support, and clean cable routing are priorities. Its mesh design and pre-installed fans make it ready to use out of the box. Covered by the applicable manufacturer warranty.
| Weight | 3.35 kg |
|---|
Reviews
Clear filtersThere are no reviews yet.