HPE Aruba ANT-2X2-2005 5 dBi N-type Network Antenna

HPE Aruba Networking ANT-2X2-2005 – dual-polarised outdoor coverage

We supply the HPE Aruba Networking ANT-2X2-2005 network antenna N-type 5 dBi for robust 2.4 GHz deployments. This kit suits installers building outdoor mesh links or client access points. Its two differently polarised elements support 2×2 MIMO throughput. The result is reliable coverage across gardens, car parks and warehouse yards.

Core numbers at a glance

Stable 2×2 MIMO performance outdoors

The kit pairs two omnidirectional elements with distinct polarisation. This design reduces nulls and improves signal consistency for 802.11n MIMO links. Because each antenna is optimised for a different path, throughput stays steadier at range. In practice, that means fewer dropouts for outdoor client access.

Wide temperature tolerance for UK sites

These antennas operate from -30 °C to 70 °C and store down to -40 °C. They handle frost, summer heat and rapid temperature swings. So you can mount them on poles or walls without shelter. Their white housing blends cleanly with most building exteriors.

N-type connectors for professional runs

Each unit uses a robust N-type connector. That suits standard low-loss coax used in permanent installs. Because the connector is weather-resistant by design, it pairs well with outdoor cable glands. We recommend confirming your cable termination matches N-type polarity.

Omnidirectional coverage for mesh and access

Omnidirectional patterns give even coverage around the pole. This is ideal for mesh nodes serving multiple directions. It also suits client access points in open areas. For example, a courtyard can be covered without sector planning.

In the box

• 2 x HPE Aruba Networking ANT-2X2-2005 antennas
• Mounting hardware for pole or wall fixings
• Quick installation guide

Before you order

• Confirm your radio uses 2.4–2.5 GHz and N-type ports
• Check your coax cable type matches N-type termination
• Verify outdoor-rated enclosures for the radio and cables
• Plan cable runs to keep bends gentle and seals tight

Frequently Asked Questions

Q: Is this antenna suitable for outdoor use?

A: Yes, it is designed for outdoor deployment with a wide operating temperature range.

Q: Does the kit include two antennas?

A: Yes, the pack contains two omnidirectional units for a 2×2 MIMO pair.

Q: What connector type do these antennas use?

A: They use N-type connectors, common in professional RF installations.

Q: What frequency range do they cover?

A: They operate in the 2.4–2.5 GHz band for 802.11n MIMO links.

Q: Are the two antennas identical?

A: They are differently polarised to form a matched MIMO pair.

Who should choose this kit

This kit is for integrators building outdoor 2.4 GHz mesh or client access links. It suits sites needing steady omnidirectional coverage and N-type connectivity. Warranty cover varies by product, so please contact us to confirm.