Ubiquiti 2.5G 30W POE+ Injector

Ubiquiti UACC-POE+-2.5G | Multi-Gigabit PoE+ Power Injector

The Ubiquiti UACC-POE+-2.5G Universal 802.3at 2.5G 30W Power PoE+ Injector delivers up to 30W of PoE+ power and a 2.5 GbE connection to compatible UniFi devices, reducing reliance on PoE switch power while maintaining high-speed data throughput.

Slim Specs Table

Why Multi-Gigabit PoE+ Matters for Your Network

The 2.5 GbE port provides faster data throughput than standard Gigabit, which is useful for bandwidth-heavy devices such as IP cameras or access points. The 30W PoE+ output supports a wide range of powered devices without requiring a PoE switch, making this injector ideal for expanding existing networks.

Built-In Protection for Reliable Operation

Surge, peak pulse, and overcurrent protection safeguard both the injector and connected devices from electrical damage. The unit also features clamping protection on data and power lines, with a maximum surge discharge of 1500A for power and 36A for data, ensuring stable performance in demanding environments.

Compact Design for Easy Installation

Measuring just 93 x 62 x 35 mm and weighing 156 g, the UACC-POE+-2.5G fits neatly into tight spaces. The RJ45 shielded socket accepts data input, while the AC cable includes an earth ground for safety. An LED indicator provides clear status monitoring at a glance.

Box contents

• Ubiquiti UACC-POE+-2.5G Universal 802.3at 2.5G 30W Power PoE+ Injector
• AC power cable with earth ground

Check before you buy

• Confirm your device supports 802.3at PoE+ and can accept power via pins 4, 5 (+) and 7, 8 (-).
• Verify the injector’s 2.5 GbE port is compatible with your network equipment.
• Check that your device requires no more than 30W of PoE+ power.
• Confirm the input voltage range (100–240V AC) matches your local supply.

Frequently Asked Questions

Q: Can this injector power non-UniFi devices?

A: Yes, as long as the device supports 802.3at PoE+ and uses the correct pin configuration.

Q: Does it support 4-pair PoE powering?

A: No, it only supports 2-pair powering on pins 4, 5 (+) and 7, 8 (-).

Q: Is there a reset button on this unit?

A: No, the UACC-POE+-2.5G does not include a reset button.

Q: What is the maximum data speed supported?

A: The injector supports up to 2.5 GbE on the LAN port.

Q: Is surge protection included?

A: Yes, it includes surge, peak pulse, and overcurrent protection.

Q: Does it have a UK plug?

A: The plug type is not specified; confirm with the retailer before purchase.

The Consultant’s verdict & warranty

The Ubiquiti UACC-POE+-2.5G is a practical solution for powering and connecting 802.3at PoE+ devices at Multi-Gigabit speeds without requiring a PoE-capable switch. Its compact design, built-in protection, and 30W output make it suitable for expanding or upgrading existing networks. Covered by the standard Manufacturer Warranty.