Team Group MP44L 2TB NVMe SSD

Team Group MP44L M.2 PCIe SSD | High-Performance Gen4 Storage

The Team Group MP44L TM8FPK002T0C101 internal solid state drive delivers cutting-edge PCIe 4.0 NVMe performance in a compact M.2 form factor. This 2 TB drive targets gamers, creators, and professionals seeking substantial storage with rapid data access speeds.

Key Specifications

Graphene Heat Dissipation Technology

The MP44L introduces a pioneering graphene-coated aluminium foil label that’s less than 1mm thick. This innovative design eliminates mechanical interference during assembly and works alongside the onboard M.2 heat sink to double heat dissipation performance. The graphene layer conducts heat away from the NAND flash and controller, maintaining optimal operating temperatures even during sustained workloads.

PCIe 4.0 Performance Advantage

Leveraging the PCIe Gen4x4 interface, this drive achieves read/write speeds up to 5,000/4,500 MB/s when utilising SLC Cache technology. Compared to PCIe Gen3 alternatives, this represents more than double the performance, drastically reducing load times and improving workflow efficiency. The SLC Cache intelligently buffers frequently accessed data, providing burst performance when you need it most.

Advanced Reliability Features

Built with stability in mind, the MP44L supports Windows TRIM optimisation and Low Density Parity Check Code (LDPC) error correction. These technologies reduce wear during high-speed operations while providing precise error detection and correction. The drive also implements NVMe 1.4 standards including NVM Sets, Predictable Latency Mode (PLM), and Read Recovery Level (RRL) technology to minimise latency and extend operational lifespan.

Box Contents

• Team Group MP44L M.2 PCIe SSD (2 TB)
• M.2 heat sink
• Installation guide
• Warranty card

Check before you buy

• Confirm your motherboard supports M.2 PCIe 4.0 NVMe drives
• Verify available M.2 slot dimensions (2280 form factor required)
• Check BIOS settings for NVMe boot support if installing as primary drive
• Ensure adequate cooling solution for sustained high-performance operation

Frequently Asked Questions

Q: Does this drive require a heatsink?

A: While the MP44L includes an M.2 heat sink, additional cooling may benefit sustained high-performance workloads.

Q: Is this compatible with older motherboards?

A: Yes, but performance will be limited to PCIe generation supported by your motherboard.

Q: What operating systems are supported?

A: Windows 10/11/7/8/Vista and Linux distributions with NVMe driver support.

Q: Can I use this as a boot drive?

A: Yes, it supports NVMe boot when configured in BIOS/UEFI settings.

Q: What is the endurance rating?

A: The drive is rated for 1,200 TBW (terabytes written) over its lifetime.

The Consultant’s verdict & warranty

The Team Group MP44L TM8FPK002T0C101 represents excellent value for users requiring substantial high-speed storage. Its combination of PCIe 4.0 performance, innovative thermal management, and comprehensive reliability features make it suitable for gaming rigs, content creation workstations, and professional applications where storage speed impacts productivity. Covered by the standard Manufacturer Warranty, this drive offers peace of mind alongside its performance credentials.