Cables Direct 77HD4-311 HDMI Cable 1m Type A Black

Cables Direct 77HD4-311 | 1m HDMI High Speed with Ethernet

The Cables Direct 77HD4-311 HDMI cable 1 m HDMI Type A (Standard) Black is a High Speed with Ethernet interface lead. It connects HDMI-equipped devices in UK home or office setups. This 1-metre cable supports 4K resolution and 3D video. It is ideal for linking a Blu-ray player, games console, or set-top box to a modern TV or AV receiver. Because it is Plug and Play, installation is simple. Gold-flashed connectors help resist corrosion for reliable signal transfer.

Cables Direct 77HD4-311 HDMI cable 1 m HDMI Type A (Standard) Black

This cable is a straight-to-straight HDMI lead with male HDMI Type A connectors on both ends. It follows the HDMI 1.4 specification. It supports the HDMI Ethernet Channel and Audio Return Channel (ARC). In practice, ARC can reduce the need for separate audio cabling. The 30 AWG wire size is suitable for a 1-metre run. However, longer runs may require a thicker gauge for best performance.

Specifications

Straight Connectors for Simple Installation

Both connectors have a straight form factor. This makes them easy to plug into typical TV and device ports. The male-to-male design fits standard HDMI sockets. Because the cable is 1 metre long, it suits close-proximity setups without excess slack.

4K and 3D Video Support

The cable supports up to 4096 x 2160 pixels and 3D video. This is suitable for 4K content from compatible sources. However, the cable is HDMI 1.4. Some advanced features of later HDMI versions may not be available. Always check your source and display specifications for full compatibility.

HDMI Ethernet Channel and ARC

It includes the HDMI Ethernet Channel and Audio Return Channel. The Ethernet channel allows compatible devices to share a network connection over the HDMI cable. ARC can send audio from a TV back to an AV receiver. So, you may reduce extra audio cabling. Note that both source and display must support these features.

Gold-Plated Connectors and Build Quality

The connector contacts are gold-plated. This provides a higher quality finish and helps resist corrosion. The 30 AWG wire is appropriate for this 1-metre length. For longer runs, consider a thicker gauge to maintain signal integrity.

What is in the box

• 1 x Cables Direct 77HD4-311 HDMI cable 1 m HDMI Type A (Standard) Black
• Straight male HDMI Type A connectors on both ends
• HDMI Ethernet Channel and Audio Return Channel support
• 3D and 4K support
• Gold-plated contacts

Check before you buy

• Confirm your source and display support HDMI 1.4 features (Ethernet, ARC, 3D, 4K).
• Verify the physical space around your HDMI ports for straight connectors.
• Check if your setup requires longer than 1 metre; 30 AWG is best for this length.
• Confirm regional compliance markings (e.g., UKCA/CE) are acceptable for your use.

Questions and answers

Summary & warranty

Choose this cable if you need a reliable 1-metre HDMI lead for 4K and 3D devices with HDMI 1.4 support. It suits UK setups requiring ARC or Ethernet over HDMI. Check your equipment for feature compatibility before purchase. Covered by the applicable manufacturer warranty.