StarTech.com 25m LC-LC OM5 Duplex Fiber Cable, LSZH
£61.11 inc VAT
In stock
In stock
More Ways to Pay
-
Buy now, pay later with Klarna
-
Pay in 3 interest-free payments with PayPal
About This Item
- 25m OM5 multimode duplex LC to LC fibre optic cable
- 100 Gbit/s data transfer rate with SWDM support
- LSZH jacket for low smoke and zero halogen safety
- Backward compatible with OM4 and OM3 networks
- 6 cm bending radius and -20 to 60 °C operating temperature
- RoHS and CE compliant with 30 dB return loss
Payment Methods:
You may also like
StarTech.com 25m (82ft) LC to LC (UPC) OM5 Multimode Fiber Optic Cable | LOMMF LSZH
This StarTech.com 25m (82ft) LC to LC (UPC) OM5 Multimode Fiber Optic Cable, 50/125µm Duplex LOMMF Zipcord, VCSEL, 40G/100G, LSZH Fiber Jumper Cord is for UK data centres upgrading to 40G/100G. Its primary USP is SWDM support over OM5 fibre. The LSZH jacket suits environments needing low smoke and zero halogen compliance.
StarTech.com 25m (82ft) LC to LC (UPC) OM5 Multimode Fiber Optic Cable, 50/125µm Duplex LOMMF Zipcord, VCSEL, 40G/100G, LSZH Fiber Jumper Cord
Slim Specs Table
| Metric | Spec. |
|---|---|
| Cable Length | 25 m |
| Connector Type | LC to LC (UPC) |
| Fibre Mode | OM5 Multimode (50/125µm) |
| Data Transfer Rate | 100 Gbit/s |
| Jacket Material | LSZH (Low Smoke Zero Halogen) |
| Bending Radius | 6 cm |
SWDM Support for 40G/100G Networks
This OM5 cable supports Shortwave Wavelength Division Multiplexing (SWDM). It works across 850–953 nm VCSEL wavelengths. This allows higher bandwidth over fewer strands. It is ideal for 40G and 100G links. So, it future-proofs your OM5 infrastructure.
Precision Performance and Low Loss
LC connectors feature ceramic ferrules for exact alignment. The UPC polish minimises back reflection. This reduces insertion loss effectively. It meets TIA/EIA-568 standards. Therefore, signal integrity stays stable in high-density racks.
LSZH Safety for UK Installations
The LSZH jacket emits minimal smoke and zero halogen. This is vital for trains, aircraft, and confined spaces. It suits areas with poor ventilation. Always verify local UK building codes. Confirm compliance for your specific site.
Backward Compatibility with Legacy Fibre
This 50/125µm duplex cable is backward compatible. It works with OM4 and OM3 networks. So, you can integrate it into existing 10G setups. No immediate hardware replacement is needed. This eases the upgrade path.
Robust Mechanical Design
The cable handles a 6 cm bending radius. It operates from -20 to 60 °C. The green jacket aids identification. The 2.9 mm diameter suits tight pathways. Verify your rack layout fits the 25 m length.
Box contents
- 1 x StarTech.com 25m LC to LC OM5 Multimode Duplex LSZH Fiber Optic Cable
Check before you buy
- Confirm your patch panel accepts LC duplex connectors.
- Verify your switch supports 850–953 nm VCSEL wavelengths.
- Check UKCA or CE marks are required for your site.
- Ensure the 25 m length fits your cable management.
Frequently Asked Questions
Q: Is this cable compatible with OM4 equipment?
A: Yes, it is backward compatible with OM4 and OM3 networks.
Q: Does the LSZH jacket meet UK building regulations?
A: LSZH is designed for low smoke and zero halogen. Confirm with your local authority.
Q: What is the maximum data rate?
A: It supports up to 100 Gbit/s over SWDM links.
Q: Are the connectors UPC polished?
A: Yes, they are LC UPC for improved return loss.
Q: Is this cable suitable for outdoor use?
A: No, it is for indoor use. Operating temperature is -20 to 60 °C.
The Consultant’s verdict & warranty
Buy this cable if you are deploying 40G/100G SWDM on OM5 fibre in UK data centres. It offers safe LSZH jacketing and proven OM5 performance. Covered by the standard Manufacturer Warranty.
Reviews
Clear filtersThere are no reviews yet.