VIDA Infinity02 120mm White Reverse Airflow Fan

VIDA Infinity02 | 120mm Reverse Blade PWM Fan

The VIDA Infinity02 120mm Reverse Bladed Computer case Fan 12 cm White 1 pc(s) is a 120 mm intake fan for UK PC builds. It uses a reverse blade design to pull air into a case while keeping the motor hub facing the interior. Because the frame is white, it suits light-themed builds. Also, the infinite mirror lighting adds a clean aesthetic. This model suits builders who want better cable routing and lower visual clutter.

Slim Technical Summary

Reverse Blade Airflow for Intake

A reverse blade layout moves air in the opposite direction to a standard fan. This means the pretty side faces the case interior while it pulls cool air in. In practice, it reduces cable mess around the motherboard edge. You get intake performance without hiding the LED ring. Because the frame is 25 mm thick, it fits most 120 mm mounts.

PWM Control and Acoustic Profile

The 4-pin PWM connector lets your motherboard adjust speed between 800 and 1800 RPM. At lower RPMs, the hydraulic bearing keeps noise minimal. At full speed, the rated noise is 38.8 dB. So you can tune cooling versus quiet operation in BIOS or software. This flexibility suits UK systems with variable room temperatures.

Lighting and Synchronisation

The fan uses a 3-pin RGB connector for motherboard control. The outer ring and centre mirror create a multi-colour effect. Because it uses standard RGB, check your board has a 3-pin header. If you run a controller, confirm the voltage and pin layout. This avoids wiring issues during the build.

Build Quality and Longevity

The hydraulic bearing offers reliable lubrication and low friction. Rated MTBF is 40,000 hours, which supports long-term use. The white finish resists visible wear in light-coloured cases. Also, the 120 x 120 x 25 mm dimensions suit most ATX and mATX layouts. This keeps fitment simple across common UK case models.

Installation and Orientation

Mount the fan with the motor hub facing the case interior for intake. Use the included screws to secure it to a 120 mm mount. Because it is a 4-pin PWM fan, connect to a fan header, not a 3-pin header. Confirm the LED wire reaches your motherboard RGB header. If clearance is tight, check radiator or heatsink clearance.

Box contents

• 1 x VIDA Infinity02 120mm Reverse Bladed Computer case Fan (White)
• Mounting screws
• Product documentation

Check before you buy

• Confirm your case has a 120 mm fan mount with 25 mm clearance.
• Check your motherboard has a 4-pin PWM header and a 3-pin RGB header.
• Verify the white colour matches your build theme and light levels.
• Confirm UK warranty support and compliance markings with the retailer.

Frequently Asked Questions

Q: Does this fan work as an intake?

A: Yes, the reverse blade design pulls air into the case while showing the LED side.

Q: What connector does it use for speed control?

A: It uses a 4-pin PWM connector for motherboard control between 800–1800 RPM.

Q: What connector is used for the LEDs?

A: It uses a 3-pin RGB connector for motherboard synchronisation.

Q: Is the fan suitable for a white build?

A: Yes, the frame is white and the LEDs show multiple colours.

Q: What is the fan thickness?

A: It is 25 mm thick, which fits standard 120 mm mounts.

The Consultant’s verdict & warranty

Choose this fan if you want an intake fan that keeps the LED ring visible inside your case. It suits UK builders using white themes who need PWM control and standard RGB. Because the speed range is flexible, it balances cooling and noise well. Covered by the standard Manufacturer Warranty.