Seagate SkyHawk 1TB 3.5″ SATA III Hard Drive
Out of stock
More Ways to Pay
-
Buy now, pay later with Klarna
-
Pay in 3 interest-free payments with PayPal
About This Item
- 1 TB surveillance hard drive for 24/7 PC-based security systems
- 3.5-inch SATA III interface with 6 Gbit/s transfer rate
- 256 MB cache buffer for smooth multi-camera recording
- Supports up to 64 HD cameras with rotational vibration sensors
- Mean time between failures of 1 million hours
- Low power consumption: 3.7 W typical, 0.25 W idle
- Operating temperature range 0-65 °C for continuous surveillance use
1-3 Days
Delivery on orders over £100
£5.80
Free
Payment Methods:
Seagate SkyHawk 1TB | 24/7 Surveillance HDD
The Seagate SkyHawk internal hard drive 1 TB 256 MB 3.5″ Serial ATA III is engineered specifically for continuous surveillance recording. Built with ImagePerfect™ firmware, this drive handles 24×7 workloads from up to 64 HD cameras without dropped frames or performance loss.
Slim Specs Table
| Metric | Spec |
|---|---|
| Capacity | 1 TB |
| Interface | Serial ATA III |
| Buffer Size | 256 MB |
| MTBF | 1,000,000 hours |
| Camera Support | Up to 64 HD cameras |
Continuous 24/7 Surveillance Performance
SkyHawk drives are built to operate non-stop in security systems where reliability is critical. The 1 TB capacity provides ample storage for extended recording periods, while the 256 MB cache ensures smooth data flow even during peak recording times. With a workload rate limit of 180 TB/year, this drive handles intensive surveillance workloads without degradation.
Advanced Health Monitoring & Protection
SkyHawk Health Management actively monitors drive conditions and provides early warnings before failures occur. The system focuses on three areas: prevention through monitoring, intervention when issues arise, and recovery options when needed. RAID RapidRebuild™ technology accelerates volume rebuilds by three times compared to traditional RAID systems, minimising downtime in critical surveillance setups.
Multi-Bay System Compatibility
Built-in rotational vibration sensors maintain performance even when multiple drives operate in close proximity within a security DVR or NVR. This feature is essential for expanding surveillance systems, allowing you to add drives without compromising stability or recording quality. The tarnish-resistant components also protect against environmental factors in various installation locations.
Energy Efficiency & Reliability
Operating at just 3.7 W typical power consumption, the SkyHawk drive generates less heat than standard desktop drives, improving long-term reliability in enclosed surveillance equipment. The 1,000,000-hour MTBF rating and 600,000 start/stop cycles demonstrate exceptional durability for continuous operation. Lower heat emissions mean reduced cooling requirements and quieter system operation.
Box contents
- Seagate SkyHawk 1 TB internal hard drive
- 3-year Rescue Data Recovery Services plan
- Installation guide
Check before you buy
- Confirm your surveillance system supports 3.5″ Serial ATA III drives
- Verify your DVR/NVR can handle the 1.8 A start-up current
- Check available drive bays for physical dimensions (101.6 mm × 147 mm × 20.2 mm)
- Confirm operating temperature range suits your installation environment (0-65 °C)
Frequently Asked Questions
Q: Is this drive suitable for regular desktop use?
A: While it will work in desktops, the SkyHawk is optimised for 24/7 surveillance workloads and may be more expensive than standard desktop drives for general use.
Q: How many cameras can this drive support simultaneously?
A: The drive supports smooth recording from up to 64 HD cameras thanks to ATA streaming technology.
Q: Does this include data recovery services?
A: Yes, it includes a 3-year Rescue Data Recovery Services plan for added protection of your surveillance footage.
Q: What warranty comes with this drive?
A: The drive is covered by a 3-year limited warranty from Seagate.
Q: Can I use this in a RAID array?
A: Yes, the drive includes RAID RapidRebuild™ technology for faster volume rebuilds in RAID configurations.
The Consultant’s verdict & warranty
The Seagate SkyHawk 1 TB delivers reliable 24/7 surveillance storage with advanced health monitoring and multi-camera support. Its purpose-built design makes it ideal for security professionals and businesses requiring continuous recording without compromise. Covered by the standard Manufacturer Warranty.
| Hard drive | |
|---|---|
| Component for | PC |
| HDD sustained transfer rate | 180 MiB/s |
| HDD interface transfer rate | 6 Gbit/s |
| Workload rate limit | 180 TB/year |
| Mean time between failures (MTBF) | 1000000 h |
| Start/stop cycles | 600000 |
| HDD size | 3.5" |
| HDD capacity | 1 TB |
| Features | |
| Type | HDD |
| Component for | PC |
| HDD sustained transfer rate | 180 MiB/s |
| HDD interface transfer rate | 6 Gbit/s |
| Workload rate limit | 180 TB/year |
| Interface | Serial ATA III |
| Mean time between failures (MTBF) | 1000000 h |
| Start/stop cycles | 600000 |
| HDD size | 3.5" |
| HDD capacity | 1 TB |
| Storage drive buffer size | 256 MB |
| Uncorrectable Bit Error Rate (UBER) | < 1 per 10^14 bits read |
| Rotational Vibration (RV) sensors | Yes |
| 24/7 operation | Yes |
| RV sensor(s) | Yes |
| Maximum number of cameras supported | 64 |
| Power | |
| Power consumption (typical) | 3.7 W |
| Power consumption (off) | 0.25 W |
| Power consumption (idle) | 2.5 W |
| Start-up current | 1.8 A |
| Operating voltage | 5 / 12 V |
| Operational conditions | |
| Operating temperature (T-T) | 0 - 65 °C |
| Technical details | |
| Interface | Serial ATA III |
| Mean time between failures (MTBF) | 1000000 h |
| Weight & dimensions | |
| Width | 101.6 mm |
| Weight | 415 g |
| Height | 147 mm |
| Depth | 20.2 mm |
| Other features | |
| Interface | Serial ATA III |
| Maximum number of cameras supported | 64 |
| Identifiers | |
| Additional EANs | 0763649148013 |

Reviews
Clear filtersThere are no reviews yet.