StarTech.com 2m CAT6a LSZH S/FTP Patch Cable – Black 10GbE 500MHz PoE++

StarTech.com 2m CAT6a LSZH Cable | 10GbE PoE++ Shielded

The StarTech.com 2m CAT6a Ethernet Cable – Black – Low Smoke Zero Halogen (LSZH) – 10GbE 500MHz 100W PoE++ Snagless RJ-45 w/Strain Reliefs S/FTP Network Patch Cord is designed for UK businesses needing safe, high-speed connectivity. It supports 10GBase-T networks and delivers 100W PoE++ power. This cable is ideal for dense server racks or office installations where fire safety standards are critical. Its LSZH jacket reduces toxic fumes during combustion.

Certified Low-Smoke Safety for UK Buildings

This cable uses a Low Smoke Zero Halogen (LSZH) jacket. It produces minimal corrosive fumes if exposed to fire. This helps maintain visibility during evacuation. It is suitable for installations in UK commercial buildings with strict fire safety regulations. Always confirm local building code compliance before installation.

10GbE Performance with Robust Shielding

The cable meets the Cat6a standard. It supports data rates up to 10,000 Mbit/s for 10GBase-T networks. The S/FTP (S-STP) shielding protects against electromagnetic interference (EMI) and alien crosstalk. This ensures stable signal integrity in electrically noisy environments. It is backward compatible with 1GBase-T networks.

100W PoE++ for High-Power Devices

This cable supports IEEE 802.3bt (PoE++) standards. It delivers up to 100W of power to connected devices. This is ideal for powering high-draw equipment like PTZ cameras or digital signage. The 27 AWG stranded copper conductors handle the current load efficiently. Verify your switch or injector supports 802.3bt before use.

Snagless Connectors with Strain Relief

The RJ-45 connectors feature snagless molded boots. These protect the latch from catching on cable bundles during installation. Integrated strain relief reduces stress at the termination points. This minimises the risk of damage from sharp bends or accidental tugs. The connectors are shielded for added EMI protection.

Slim Specs Table

Box contents

• 1 x StarTech.com 2m CAT6a Ethernet Cable (Black, LSZH)

Check before you buy

• Confirm your network switch or injector supports IEEE 802.3bt (PoE++) for 100W power delivery.
• Verify your patch panel ports accept standard RJ-45 connectors.
• Check UK building fire regulations for LSZH cable requirements in your specific installation area.
• Ensure cable length (2m) suits your rack or workstation layout without excessive slack.

Frequently Asked Questions

Q: Is this cable suitable for UK office fire safety standards?

A: Yes, the LSZH jacket produces low smoke and zero halogen, aiding safe evacuation in commercial buildings.

Q: Does this cable support 10 Gigabit speeds?

A: Yes, it is Cat6a rated and supports 10GBase-T up to 10,000 Mbit/s.

Q: Can I use this for PoE++ devices?

A: Yes, it supports 100W PoE++ (IEEE 802.3bt) for high-power devices.

Q: Are the connectors shielded?

A: Yes, the cable features S/FTP shielding and shielded RJ-45 connectors for EMI protection.

Q: Is the cable plug-and-play?

A: Yes, it is a straight-through patch cord with RJ-45 male connectors on both ends.

The Consultant’s verdict & warranty

This cable is recommended for UK IT managers upgrading to 10GbE networks while prioritising fire safety. It is ideal for PoE++ cameras, access points, and server racks in commercial environments. The snagless boots and strain relief suit high-density cabling. Covered by the standard Manufacturer Warranty.