TP-Link Omada BE9300 Wi-Fi 7 Ceiling Mount Access Point

TP-Link EAP773 – Ultra-Thin Wi-Fi 7 Ceiling Access Point

The TP-Link Omada BE9300 Ceiling Mount Tri-Band Wi-Fi 7 Access Point serves UK offices, hotels and schools. It reaches up to 9,300 Mbps across three frequency bands. The 6 GHz band supports wide 320 MHz channels for the fastest wireless throughput. Meanwhile, 4096-QAM modulation packs more data into every signal. At just 32.5 mm tall, the EAP773 mounts flush to a ceiling or wall. Because it uses Multi-Link Operation, devices can transmit across multiple bands at once. So you get lower latency and fewer dead zones in demanding spaces.

Key specs at a glance

How Multi-Link Operation cuts latency

Multi-Link Operation lets your devices send and receive data across different bands at the same time. Take video calls: they can use the 6 GHz band while background traffic runs on 5 GHz. The EAP773 handles both streams simultaneously, reducing lag. Multi-RU support also opens up channels that earlier standards left unused. So you gain more usable capacity without adding extra access points.

10G PoE++ keeps wired uplinks future-proof

The EAP773 includes a single 10 Gigabit Ethernet port with PoE++ support. This means the access point draws power and data through one cable. Because the uplink runs at 10 Gbps, it keeps pace with the access point’s peak wireless speeds. In practice, you avoid the bottleneck that a 1 GbE port would create. It also simplifies installation in large spaces where running separate power cables is impractical.

Deploying the TP-Link Omada BE9300 Ceiling Mount Tri-Band Wi-Fi 7 Access Point at scale

The EAP773 fits into TP-Link’s Omada SDN platform for centralised management. You can control it from the cloud or run a local controller on your own hardware. VLAN support, rate limiting and QoS rules are all configurable from a single dashboard. Band steering and airtime fairness run automatically to distribute traffic evenly. Also, automatic channel selection adjusts power levels to reduce interference between neighbouring access points. Omada Mesh technology lets you extend coverage without running Ethernet to every unit.

WPA3 security and guest access controls

WPA3 encryption protects both personal and enterprise wireless connections. You can set up to 24 SSIDs to isolate guest traffic from internal resources. RADIUS authentication integrates with existing directory services. Additionally, rogue AP detection scans for unauthorised devices on your network. Captive portal support lets you offer SMS or voucher-based guest access without extra hardware.

What you receive

• 1× TP-Link EAP773 access point
• Mounting kit
• Quick start guide

Before you order

• Confirm your network switch supports 10GbE if you plan to use the full wired uplink speed.
• Verify your ceiling or wall can accommodate the 220 mm circular mounting footprint.
• Ensure your Omada controller firmware is current for Wi-Fi 7 feature support.
• Check that your PoE switch or injector meets the 802.3bt (PoE++) standard.

Frequently Asked Questions

Frequently Asked Questions

Q: Does this access point support the 6 GHz band?

A: Yes. The EAP773 is tri-band, covering 2.4 GHz, 5 GHz and 6 GHz with 320 MHz channels on the 6 GHz band.

Q: Can I mount it on a wall as well as a ceiling?

A: Yes. It supports both ceiling and wall mounting. The mounting kit is included in the box.

Q: How many users can connect at the same time?

A: The EAP773 supports up to 128 concurrent client connections across all three bands.

Q: Does it integrate with Omada SDN cloud management?

A: Yes. It works with Omada SDN for cloud or local controller management, including VLANs, QoS and rogue AP detection.

Q: What PoE standard does it require?

A: It uses an 802.3bt PoE++ port for both power and 10 Gbps data through a single cable.

Our verdict

The TP-Link Omada BE9300 Ceiling Mount Tri-Band Wi-Fi 7 Access Point suits businesses that need high-density, low-latency wireless coverage. Its 10G PoE++ uplink, WPA3 security and Omada SDN integration make it a strong choice for managed networks. The ultra-thin 32.5 mm design stays discreet on any ceiling or wall. Warranty cover varies by product, so please contact us to confirm.