Corsair 3200D RS ARGB Mid-Tower ATX Case Black

£69.25 inc VAT

In stock

In stock

More Ways to Pay

  • Buy now, pay later with Klarna
  • Pay in 3 interest-free payments with PayPal

About This Item

  • Black Midi Tower ATX case with tempered glass side window and steel/plastic construction
  • Supports Mini-ITX, micro ATX and ATX motherboards with 7 expansion slots
  • Maximum component clearance: 40 cm GPU, 16.5 cm CPU cooler and 18 cm PSU
  • Three 120 mm RS ARGB fans included with motherboard-controlled RGB lighting
  • Modern front I/O with USB 3.2 Gen 2×2 Type-C, USB 2.0 and combo audio jack
  • Radiator support up to 360 mm front and top with anti-dust filters included

Payment Methods:

payments
Description

Corsair 3200D RS ARGB | Spacious Midi Tower Case

The Corsair 3200D RS ARGB Mid-Tower PC Case Midi Tower Black is a midi tower chassis built for modern builds. It suits gamers and creators who need space for large GPUs. This case includes three RS120 ARGB fans and offers a tempered glass side window. It focuses on airflow and clean cable routing for UK system builders.

Slim Specs Table

Metric Spec.
Form Factor Midi Tower
Motherboard Support Mini-ITX, micro ATX, ATX
Max GPU Length 40 cm
Max CPU Cooler Height 16.5 cm
Front I/O 1x USB 3.2 Gen 2×2 Type-C, 1x USB 2.0
Materials Steel, Tempered Glass, Plastic

Optimised Airflow for Large GPUs

The chassis provides 375mm of clearance with front fans installed. This gives powerful GPUs plenty of room to breathe. A PSU shroud includes two 120mm fan mounts. The front mount angles directly at the GPU. This directs cooling where it is needed most.

Included RS120 ARGB Cooling

The case arrives with three 120mm RS ARGB fans pre-installed. You can plug them straight into your motherboard. Customise lighting using ASUS Aura Sync, MSI Mystic Light, ASRock Polychrome RGB, or GIGABYTE RGB Fusion. This offers easy control without extra hubs.

Simplified Cable Management

Reduce cable clutter with daisy-chained fan connections. The RS ARGB series uses a single 4-pin PWM and one +5V ARGB connector. This keeps wiring tidy. It also supports reverse-connector motherboards for a cleaner look.

Modern Front Panel Connectivity

The top-mounted I/O grants easy access to ports. It includes a USB 3.2 Gen 2×2 Type-C port for 20Gb/s transfers. A USB 2.0 Type-A port and combo audio jack are present. The power button is also located here.

Box contents

  • Corsair 3200D RS ARGB Mid-Tower PC Case Midi Tower Black chassis
  • 3x 120mm RS ARGB fans (pre-installed)
  • Tempered glass side panel
  • Accessory kit (screws and ties)

Check before you buy

  • Confirm your motherboard fits ATX, micro ATX, or Mini-ITX form factors.
  • Verify your graphics card is under 40cm in length.
  • Check your CPU cooler height is below 16.5cm.
  • Ensure your PSU is ATX format and under 18cm long.

Frequently Asked Questions

Q: Does this case include a power supply?

A: No, the power supply is not included. You must supply your own ATX PSU.

Q: What radiator sizes are supported?

A: Front supports 240, 280, 360mm. Top supports 240, 280, 360mm. Rear supports 120mm.

Q: Is the side panel tempered glass?

A: Yes, the side window is tempered glass for viewing internal components.

Q: How many storage drives can I install?

A: You can install two 2.5-inch drives and one internal 3.5-inch drive.

Q: What is the warranty coverage?

A: Covered by the standard Manufacturer Warranty. Confirm the exact length with the retailer.

The Consultant’s verdict & warranty

Buy the Corsair 3200D RS ARGB Mid-Tower PC Case Midi Tower Black if you need a spacious midi tower for large GPUs and liquid cooling. It suits builders who value included ARGB fans and tidy cable routing. Covered by the standard Manufacturer Warranty.

Customer Reviews

0 reviews
0
0
0
0
0

There are no reviews yet.

Be the first to review “Corsair 3200D RS ARGB Mid-Tower ATX Case Black”

Your email address will not be published. Required fields are marked *

You have to be logged in to be able to add photos to your review.