Fractal Design Epoch Black TG RGB Light Tint
£112.99 Original price was: £112.99.£105.99Current price is: £105.99. ex VAT
In stock
In stock
- Free UK delivery on orders over £200
-
DPD tracked delivery
-
Buy now, pay later with Klarna
-
Pay in 3 instalments with PayPal
About This Item
- Gaming-optimised Midi Tower case with tempered glass side window
- Supports ATX, micro ATX and Mini-ITX motherboards
- Accommodates graphics cards up to 37.2 cm and CPU coolers up to 17 cm
- Storage: two 3.5″ and two 2.5″ drive bays
- Three Momentum 12 fans installed with multi-colour case illumination
- Top I/O with 20 Gbps USB Type-C, two USB-A and combo audio jack
You may also like
be quiet! PURE BASE 501 White Tower
In stock
Antec P20C Midi Tower White
In stock
Antec P20CE Midi Tower Black
In stock
Antec FLUX SE Midi Tower Black
In stock
Antec C7 ARGB Black Tower
In stock
CIT Jet Stream Mid Tower Case with 500W PSU
In stock
Antec C3 Midi Tower Black
In stock
DeepCool CG530 Midi Tower White
In stock
DeepCool CG530 Dual-Chamber Tempered Glass Case
In stock
be quiet! LIGHT BASE 600 White
In stock
Fractal Design Epoch Black TG RGB Light Tint | Midi Tower Gaming Case
The Fractal Design Epoch Black TG RGB Light Tint is a contemporary midi tower built for UK gamers who want a clean aesthetic and strong airflow. This case integrates seamlessly into a gaming station with tidy cable routing and a light-tinted tempered glass window. It includes three high-performance Momentum 12 fans and supports ATX, micro ATX, and Mini-ITX motherboards.
Slim Specifications
| Metric | Spec. |
|---|---|
| Form Factor | Midi Tower |
| Motherboard Support | ATX, micro ATX, Mini-ITX |
| Max Graphics Card Length | 37.2 cm |
| Max CPU Cooler Height | 17 cm |
| Front Radiator Support | 280, 360 mm |
| Included Fans | 3x 120 mm |
Engineered for Airflow and Cooling
The Epoch features ventilated top and front panels for strong natural airflow. This layout helps keep high-performance components running cool under load. Because the interior is clean, air moves unobstructed from the front to the rear exhaust.
You can install up to three 120 mm or two 140 mm fans at the front. The top panel supports two 120 mm or two 140 mm fans. Rear ventilation accommodates a single 120 mm fan or radiator.
Built-in RGB Illumination
Three included Momentum 12 fans feature multi-colour illumination. The lighting is located at the case fans, adding a custom look to your build. You can control the aesthetic to match your setup.
The light-tinted tempered glass side window showcases your internal components. This provides a refined view without excessive glare from the RGB.
Spacious Component Support
Create a powerful gaming system with room for large hardware. The case supports graphics cards up to 372 mm long with front-mounted fans. If you install a front radiator, the maximum GPU length is 345 mm.
CPU air coolers up to 170 mm in height fit comfortably. The case also accommodates ATX power supplies up to 255 mm in length. This ensures compatibility with a wide range of standard PSUs.
Easy Build Experience
Tool-free access simplifies the building process. The front panel removes with a pull-to-release mechanism. A sliding top panel features a fabric tab for easy handling.
Cable management is straightforward with dedicated routing grommets and fixed straps. This helps you achieve a neat interior finish. The I/O panel at the top includes a 20 Gbps USB Type-C port and two USB-A ports.
Box contents
- Fractal Design Epoch Black TG RGB Light Tint case
- 3x Momentum 12 fans (pre-installed)
- Accessory kit
- User manual
Before you order
- Confirm your motherboard size matches ATX, micro ATX, or Mini-ITX support.
- Verify your graphics card length does not exceed 372 mm with front fans.
- Check your CPU cooler height is under 170 mm for clearance.
- Confirm UK plug compatibility for any additional case fans or controllers.
Buyer FAQs
Is the power supply included with this case?
What motherboard form factors does the case support?
How many fans are pre-installed?
What is the maximum radiator size supported?
Does the case have a USB Type-C port?
Summary & warranty
This case is ideal for UK gamers building a new ATX or micro ATX system who value a clean look and included RGB fans. It offers strong cooling potential and easy building access without unnecessary complexity. Covered by the applicable manufacturer warranty.
| Number of 3.5 bays | 2 |
|---|---|
| Number of 2.5 bays | 2 |
| Supported motherboard form factors | ATX, micro ATX, Mini-ITX |
| Supported HDD sizes | 2.5″ |
| Suitable for | Gaming |
| Side window | Yes |
| Product colour | Black |
| Number of expansion slots | 7 |
| Maximum CPU cooler height | 17 cm |
| Maximum graphics card length | 37.2 cm |
| Maximum PSU length | 25.5 cm |
| Type | PC |
| Form factor | Midi Tower |
| Warranty period | 2 year(s) |
| Material | Steel, Tempered glass |
| Illumination location | Case fans |
| Illumination colour | Multi |
| Illumination | Yes |
| Cable management | Yes |
| On/off button | Yes |
| Anti-dust filter | Yes |
| Tempered glass panels | Yes |
| Supported power supply form factors | ATX |
| Power supply included | No |
| USB 3.2 Gen 2x2 Type-C ports quantity | 1 |
| USB 3.2 Gen 1 3.1 Gen 1 Type-A ports quantity | 2 |
| Combo headphone/mic port | Yes |
| Front radiator sizes supported | 280,360 mm |
| Rear radiator sizes supported | 120 mm |
| Top radiator sizes supported | 240 mm |
| Front fans installed | 3x 120 mm |
| Number of front fans supported max | 3 |
| Front fans diameters supported | 120,140 mm |
| Number of rear fans supported max | 1 |
| Rear fans diameters supported | 120 mm |
| Number of top fans supported max | 2 |
| Top fans diameters supported | 120,140 mm |
| SSD form factor | 2.5″ |
| Manual | Yes |
| Width | 215 mm |
| Depth | 447 mm |
| Height | 469 mm |
| Weight | 7.86 kg |
| Package width | 326 mm |
| Package height | 553 mm |
| Package depth | 565 mm |
| Package weight | 9.41 kg |
| Distributor SKUs | CLFD-C-EPO1A-04 |

Reviews
Clear filtersThere are no reviews yet.